{"product_id":"strange-engineering-evolution-dynamic-drive-mount-drag-race-front-brake-kit-reuses-oem-hubs-1993-2002-camaro-firebird-b4177wce","title":"Strange Engineering Evolution Dynamic Drive Mount Drag Race Front Brake Kit - Reuses OEM Hubs (1993 - 2002 Camaro \/ Firebird) - B4177WCE","description":"\u003cb\u003eDesigned Specifically For Drag Racing\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eEvolution Front Brake Kit\u003c\/b\u003e\u003cbr\u003e1993-1997 Camaro \/ Firebird \/ Trans Am\u003cbr\u003e• Reuses factory wheel hubs\u003cbr\u003e• Requires modification to knuckles *\u003cbr\u003e* See instruction sheet\u003cbr\u003e\u003cb\u003eEvolution S Dynamic Drive Mount (DDM) Stainless Steel Rotors\u003c\/b\u003e – B2798L \/ B2798R\u003cbr\u003e• Evolution S Rotor mounts to Billet Aluminum DDM Hat – reducing rotating weight\u003cbr\u003e• DDM system secures the rotor and allows for rotor thermal expansion – drastically reducing warping, coning, and cracking which are common with bolt retention designs\u003cbr\u003e• DDM system design is secured by an internal Spirolox, eliminating heavy bolts and hardware- further reducing rotating weight\u003cbr\u003e• Evolution S rotors are machined and fully ground from Stainless Steel that exhibits 48% greater yield strength at 1,000° F compared to carbon steel- further maintaining rotor integrity\u003cbr\u003e• Stainless steel Evolution S rotors are highly resistant to heat and corrosion\u003cbr\u003e• Unique Aero Slot design reduces rotating weight and promotes even heat dissipation- compared to common round drilled holes\u003cbr\u003e• Scalloped design further reduces rotating weight\u003cbr\u003e• 11.250″ OD \/ .355″ thickness\u003cbr\u003e\u003cb\u003eRegister Ring\u003c\/b\u003e\u003cbr\u003e• Adapts brake rotor to OEM hub register\u003cbr\u003e• Positions rotor for proper caliper alignment\u003cbr\u003e\u003cb\u003eFour Piston Billet Evolution 4 Calipers\u003c\/b\u003e – B1900\u003cbr\u003e• Stainless steel pistons mitigate heat transfer to brake fluid\u003cbr\u003e• Reverse dish pressure vessel piston maximizes stiffness\u003cbr\u003e• High retraction piston and O-ring design to eliminate drag during acceleration\u003cbr\u003e• Computer finite element analysis (FEA) optimized and field-tested calipers- Evolution 4 design improves piston retraction, pedal feel, and stiffness resulting in improved pad wear and exemplary braking efficiency\u003cbr\u003e• All pistons are 1.750″ for increased clamping force\u003cbr\u003e\u003cb\u003eDTC-30 Semi Metallic Brake Pads\u003c\/b\u003e – B5010\u003cbr\u003e• Best compound suited for front application\u003cbr\u003e• Excellent cold holding capabilities\u003cbr\u003e\u003cb\u003eAluminum Caliper Mounts\u003c\/b\u003e\u003cbr\u003e• Billet one piece design\u003cbr\u003e• Eliminates bolts, spacers \u0026amp; nuts that require periodic maintenance\u003cbr\u003eAll Necessary Mounting Hardware\u003cbr\u003e\u003cb\u003eHubs, Studs, Bearings, Races, Seals, Hoses, \u0026amp; Brake Lines Are Not Included\u003c\/b\u003e\u003cbr\u003eCalipers are tapped 1\/8″ NPT and supplied with a straight male 3 AN fitting\u003cbr\u003eUse Teflon® tape or liquid on the pipe threads of the fitting\u003cbr\u003eLeave a few threads from the tip uncoated\u003cbr\u003eThis will avoid depositing material inside the caliper\u003cbr\u003eTorque fitting to 25 ft lbs\u003cbr\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003cbr\u003e1993 Chevrolet Camaro\u003cbr\u003e 1994 Chevrolet Camaro\u003cbr\u003e 1995 Chevrolet Camaro\u003cbr\u003e 1996 Chevrolet Camaro\u003cbr\u003e 1997 Chevrolet Camaro\u003cbr\u003e\u003cbr\u003e1993 Pontiac Firebird\u003cbr\u003e 1994 Pontiac Firebird\u003cbr\u003e 1995 Pontiac Firebird\u003cbr\u003e 1996 Pontiac Firebird\u003cbr\u003e 1997 Pontiac Firebird\u003cbr\u003e1993 Pontiac Trans Am\u003cbr\u003e 1994 Pontiac Trans Am\u003cbr\u003e 1995 Pontiac Trans Am\u003cbr\u003e 1996 Pontiac Trans Am\u003cbr\u003e 1997 Pontiac Trans Am\u003cbr\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Strange Engineering","offers":[{"title":"Default Title","offer_id":43875884597341,"sku":"strange-B4177WCE","price":1275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/EVO-FNH-2__94796.1732430581.jpg?v=1765123621","url":"https:\/\/www.byepolr.com\/products\/strange-engineering-evolution-dynamic-drive-mount-drag-race-front-brake-kit-reuses-oem-hubs-1993-2002-camaro-firebird-b4177wce","provider":"ByePolr Performance","version":"1.0","type":"link"}