{"title":"2024-2026 Mustang","description":"","products":[{"product_id":"steeda-proflow-cold-air-intake-2024-2026-mustang-gt-dark-horse-555-3234","title":"Steeda ProFlow Cold Air Intake (2024 - 2026 Mustang GT \/ Dark Horse) 555-3234","description":"\u003cp\u003eSteeda's ProFlow Cold Air Intake for the S650 Mustang opens up the intake system to let the 4th Generation Coyote V8 breathe. With massive CNC-machined mass air meters and custom molded silicone tubes, this intake will impress. Our proven CNC-machined billet mass air meter delivers a clean signal to your mass air sensor for excellent response and drivability when getting off and on the throttle. This kit can utilize the factory airbox lids to retain the ram air effect of the stock airboxes, or the lids can be removed for an open intake that makes a statement at any show you go to.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDesigned for peak performance.\u003c\/strong\u003e Utilizing decades of experience in tuning, designing cold air intakes, and racing Steeda has engineered this cold air intake to perform. It starts with our high-flow oiled air filters that reduce restriction. The CNC-machined mass air meter is massive at over 4.25\" ID and allows for unrestricted airflow. Our custom-made 4-ply silicone intake tube starts at 4.75\" ID and necks down to 95mm to increase velocity and also allow for throttle body upgrades.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTested and proven\u003c\/strong\u003e.\u003c\/span\u003e Steeda has tested this intake with different driving styles and situations to ensure compatibility with the factory programming. The result is an intake system that improves performance when installed and will not negatively affect drivability but is ready to provide additional performance improvements when tuning becomes available.\u003c\/p\u003e\u003cp\u003ePurchase your Steeda ProFlow Mustang 5.0L Cold Air Intake for 2024+ S650 at Steeda Autosports today!\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e+27.72rwhp and +21.18rwtq with PBD tune\u003c\/li\u003e\n\u003cli\u003e+13 peak hp, +11 peak tq with no tune\u003c\/li\u003e\n\u003cli\u003eOver 25% larger velocity intake tubes than the competition\u003c\/li\u003e\n\u003cli\u003eOver 6% larger mass air meter than the competition\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eTested on the street and track\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum mass air meters, CNC-machined in-house\u003c\/li\u003e\n\u003cli\u003eSuperior MAF sensor signal\u003c\/li\u003e\n\u003cli\u003e6061 billet aluminum PCV line fitting, CNC-machined in-house\u003c\/li\u003e\n\u003cli\u003eMaintains use of factory air boxes for ram air effect\u003c\/li\u003e\n\u003cli\u003eLower intake temps than competitors open air CAIs\u003c\/li\u003e\n\u003cli\u003eCan be run in a closed or open lid configuration\u003c\/li\u003e\n\u003cli\u003eSmooth surface finish on machined parts\u003c\/li\u003e\n\u003cli\u003eStainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eCustom-made 4-ply silicone hoses\u003c\/li\u003e\n\u003cli\u003eReusable oiled air filters\u003c\/li\u003e\n\u003cli\u003e+13 peak hp, +11 peak tq over the leading competitor\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/span\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNote: \u003c\/span\u003eFederal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e\u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan\u003eWARNING:\u003c\/span\u003e California Residents: Cancer and Reproductive Harm; \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320430685,"sku":"555-3234","price":699.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/STA09440__31954__14673.1758289827.jpg?v=1765078269"},{"product_id":"steeda-stop-the-hop-drag-ultimate-kit-2024-2026-mustang-w-brembo-555-2129-d-7gpp","title":"Steeda Stop The hop Drag Ultimate Kit (2024 - 2026 Mustang w\/ Brembo) 555-2129-D-7GPP","description":"\u003ch2\u003eStop the Hop Drag Ultimate Kit – S650 Mustang\u003c\/h2\u003e\u003cp\u003eLooking to \u003cstrong\u003eeliminate wheel hop\u003c\/strong\u003e and gain maximum traction at the drag strip? The \u003cstrong\u003eStop the Hop Drag Ultimate Kit\u003c\/strong\u003e is engineered specifically for the new S650 Mustang, delivering the ultimate foundation for suspension compliance, straight-line stability, and record-breaking launches.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eWhy Choose the Stop the Hop Kit?\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003eThe factory IRS subframe mounts with soft rubber bushings that create unwanted flex and deflection under hard acceleration. This kit directly addresses those weak points, ensuring your Mustang hooks every time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e555-5754\u003c\/span\u003e - Steeda IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4438\u003c\/span\u003e - Steeda IRS Subframe Alignment Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4437\u003c\/span\u003e - Steeda IRS Subframe Bushing Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4123 - \u003c\/span\u003eSteeda Rear Adjustable Camber Arms\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4130 - \u003c\/span\u003eSteeda Billet Aluminum Vertical Links with Delrin Bushings\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4120 - \u003c\/span\u003eSteeda Adjustable Rear Toe Links\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4141\u003c\/span\u003e - Steeda Rear Lower Control Arm Spherical Bearings\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eM-5A460-M -\u003c\/span\u003e Ford Performance Knuckle To Toe Link Bearing Assembly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong style=\"font-size: 1.17em;\"\u003eKit Components \u0026amp; Features\u003c\/strong\u003e\u003c\/h3\u003e\u003ch4\u003e\u003cstrong\u003eIRS Subframe Alignment Dowel Kit\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eMachined Delrin inserts fill factory bolt hole voids to \u003cstrong\u003esquare the subframe\u003c\/strong\u003e to the chassis and limit unwanted movement during launches and braking.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eIRS Subframe Bushing Support System\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eAn \u003cstrong\u003e8-piece patented design\u003c\/strong\u003e made from billet 6061 aluminum, filling factory voids to eliminate up-and-down subframe movement. Built for durability and precision.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eChrome-Moly IRS Subframe Support Brace\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eThe strongest S650 IRS brace available. This \u003cstrong\u003e5-point support system\u003c\/strong\u003e ties the subframe directly to the chassis using factory mounting points for unmatched rigidity and launch consistency.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eRear Lower Control Arm Spherical Bearings\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eEssential for drag racing, these bearings remove bushing deflection and \u003cstrong\u003eprevent negative toe buildup\u003c\/strong\u003e on launch, helping your tires hook immediately for faster 60-foot times.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eAdjustable Rear Camber Arms\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eCrafted from CNC machined 6061 aluminum, these arms provide \u003cstrong\u003e+2° to -5° of camber adjustment\u003c\/strong\u003e, perfect for dialing in a race alignment and maximizing your contact patch.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eAdjustable Rear Toe Links\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eMaintain complete control of your toe settings under hard acceleration, helping you \u003cstrong\u003eimprove launches and reduce quarter-mile times\u003c\/strong\u003e.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eBillet Vertical Links with Delrin Bushings\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eUpgraded CNC machined billet aluminum links \u003cstrong\u003ereduce deflection\u003c\/strong\u003e and stiffen the rear suspension. More power to the ground with less wasted energy.\u003c\/p\u003e\u003ch4\u003e\u003cstrong\u003eFord Performance Knuckle to Toe Link Assembly\u003c\/strong\u003e\u003c\/h4\u003e\u003cp\u003eReplaces the factory rubber bushing with a high-performance solution, enhancing handling and reducing suspension compliance.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eKit Benefits\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates wheel hop \u0026amp; subframe movement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproves 60-foot times\u003c\/strong\u003e and quarter-mile consistency\u003c\/li\u003e\n\u003cli\u003eEnhances suspension geometry \u0026amp; tire contact\u003c\/li\u003e\n\u003cli\u003eSimple, bolt-in installation with no permanent modifications\u003c\/li\u003e\n\u003cli\u003eEngineered for drag racers demanding ultimate traction\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eNote: Steeda IRS Subframe Support Braces will not fit convertible models.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cem\u003eFITS:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cem\u003e2024\u003cem\u003e Ford Mustang\u003c\/em\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e2025\u003cem\u003e Ford Mustang\u003c\/em\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e2026 Ford Mustang\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320496221,"sku":"555-2129-D-7GPP","price":2473.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-2129-D-7GPP-v1-1__93460__03787.1758142517.jpg?v=1765078289"},{"product_id":"steeda-resonator-delete-hx-pipe-304-stainless-steel-2015-2026-mustang-50l-coyote-555-3625","title":"Steeda Resonator Delete H\/X-Pipe 304 Stainless Steel (2015 - 2026 Mustang 5.0L Coyote) 555-3625","description":"\u003ch1\u003eSteeda 304SS Resonator Delete H\/X-Pipe (Hex Pipe) – 2015–2026 Mustang GT 5.0L Coyote (S550\/S650)\u003c\/h1\u003e \u003cp\u003eUpgrade your Mustang’s exhaust system with Steeda’s 304 Stainless Steel Resonator Delete H\/X-Pipe, engineered for 2015–2026 5.0L Coyote-powered S550 and S650 Mustang GT models. This performance-focused exhaust upgrade enhances sound, boosts performance, and sheds up to 6 pounds of weight—all at an affordable price.\u003c\/p\u003e \u003cp\u003eThe unique H\/X crossover design delivers the best of both worlds, combining the deep rumble of an H-pipe with the high-flow efficiency of an X-pipe. Unlike many aftermarket options, Steeda’s patent-pending system is designed to retain the factory heat shield found on 2018+ GTs without the need for cutting, expanding, or chiseling OE parts.\u003c\/p\u003e \u003cp\u003eCrafted from premium U.S.-sourced T-304 stainless steel, this mandrel-bent 2.5\" tubing resists the rust and corrosion issues common with 409 stainless or aluminized mild steel. Installation is straightforward, fitting directly between the factory catalytic converters and mufflers, and it’s fully compatible with most aftermarket axle-back exhaust systems. Flush-fit band clamps are included for leak-free connections and allow the pipe to be shortened if needed.\u003c\/p\u003e \u003cblockquote\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e As with all resonator deletes on the market, cutting the OE exhaust pipes is required.\u003c\/p\u003e \u003c\/blockquote\u003e \u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cp\u003eProudly made in the USA\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003ePatent-pending design\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eDelivers combined performance of an H-pipe and X-pipe\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eBuilt from durable T-304 stainless steel (no rusting like 409SS or aluminized steel)\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eAggressive, race-inspired exhaust note\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eReduces weight by up to 6 lbs\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eNo tuning required\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003e32\" overall length\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eAdjustable band clamps allow shortening \u0026amp; reinstallation of the factory resonator\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eRetains OEM heat shields on 2018+ GT models\u003c\/p\u003e \u003c\/li\u003e \u003cli\u003e \u003cp\u003eFits Mustang GT, Bullitt, Mach 1, and Dark Horse\u003c\/p\u003e \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFITS:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e2015 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2016 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2017 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2018 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2019 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2020 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2021 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2022 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2023 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2024 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2025 Ford Mustang 5.0L\u003c\/li\u003e \u003cli\u003e2026 Ford Mustang 5.0L\u003c\/li\u003e \u003c\/ul\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320561757,"sku":"555-3625","price":388.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/Hex_Pipe_8-6-25__15449__58537.1755612406.jpg?v=1765078293"},{"product_id":"steeda-tri-ax-short-throw-sport-shifter-2015-2026-mustang-555-7320","title":"Steeda Tri-Ax Short Throw Sport Shifter (2015 - 2026 Mustang) 555-7320","description":"\u003ch2\u003eSteeda Tri-Ax Short Throw Sport Shifter (555-7320) - 2015-2026 Mustang\u003c\/h2\u003e \u003cp\u003eTransform the way your Mustang shifts with the \u003cstrong\u003eSteeda Tri-Ax Short Throw Sport Shifter (555-7320)\u003c\/strong\u003e. Engineered for the 2015–2026 Mustang GT, EcoBoost, and V6 equipped with the MT-82 transmission, this shifter delivers tighter, quicker, and more precise gear changes—making every drive more exhilarating.\u003c\/p\u003e \u003cp\u003eWith a re-engineered pivot mechanism, this short throw shifter provides a \u003cstrong\u003e15% reduction in throw\u003c\/strong\u003e while retaining factory comfort and functionality. The solid front shifter mount bushings eliminate excess movement, giving you a crisp and accurate shift every time. Constructed from \u003cstrong\u003e4140 heat-treated, nickel-plated steel\u003c\/strong\u003e, the Steeda Tri-Ax is built for ultimate strength and long-lasting performance without adding unwanted NVH (noise, vibration, harshness).\u003c\/p\u003e \u003cp\u003eInstallation is simple and requires no permanent modifications, taking about 1.5 hours with basic hand tools. Retaining the factory shift knob thread and reverse lock-out, this kit offers a factory-like fit with race-inspired performance. Whether you’re carving corners or cruising the street, Steeda’s Tri-Ax Short Throw Sport Shifter provides the confidence and precision your Mustang deserves.\u003c\/p\u003e \u003ch3\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003e15% reduction in shifter throw for quicker gear changes\u003c\/li\u003e \u003cli\u003eNo permanent modifications required\u003c\/li\u003e \u003cli\u003eTighter, crisper, and more precise shifting feel\u003c\/li\u003e \u003cli\u003eSolid, one-piece shift lever design\u003c\/li\u003e \u003cli\u003eNo increase in noise, vibration, or harshness (NVH)\u003c\/li\u003e \u003cli\u003eRetains factory shift knob thread (M12 x 1.25) and reverse lock-out\u003c\/li\u003e \u003cli\u003eManufactured from 4140 heat-treated, nickel-plated steel\u003c\/li\u003e \u003cli\u003eBacked by Steeda’s limited lifetime warranty\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e \u003cp style=\"padding-left: 30px;\"\u003e- 2015 Ford Mustang S550\u003cbr\u003e- 2016 Ford Mustang S550\u003cbr\u003e- 2017 Ford Mustang S550\u003cbr\u003e- 2018 Ford Mustang S550\u003cbr\u003e- 2019 Ford Mustang S550\u003cbr\u003e- 2020 Ford Mustang S550\u003cbr\u003e- 2021 Ford Mustang S550\u003cbr\u003e- 2022 Ford Mustang S550\u003cbr\u003e- 2023 Ford Mustang S550\u003cbr\u003e- 2024 Ford Mustang S650\u003cbr\u003e- 2025 Ford Mustang S650\u003cbr\u003e- 2026 Ford Mustang S650\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320627293,"sku":"555-7320","price":237.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-7320-V1-1__42471__00618.1748447872.jpg?v=1765078299"},{"product_id":"steeda-differential-cooler-kit-2015-2026-mustang-555-3725","title":"Steeda Differential Cooler Kit (2015 - 2026 Mustang) 555-3725","description":"\u003cp\u003eLower your differential temperatures and get your Mustang ready for the track with this differential cooler kit from Steeda!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePremium components.\u003c\/span\u003e This kit includes high-quality pre-made -10AN braided stainless steel oil lines that feed into an industry standard Tilton pump. The cooler core that we use is a Ford Genuine piece that will mount in the factory location. The wiring kit that is included allows for versatile install and the ability to customize further if you want a temperature controlled switch.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMore time on the track.\u003c\/span\u003e Without a differential cooler, the Mustang can experience high differential temperatures on the track, which will lead to accelerated wear on the bearings, differential, and gear set. It can also trigger a factory warning which will reduce power and speed, cutting your track time short. Our testing has shown a reduction in temperature of up to 75°F after an hour and a half of track use in Central Florida summer heat. This will keep your differential temperatures under the warning threshold and within an acceptable range so that you have no worries about a reduction in power or speed.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFully reversible.\u003c\/span\u003e Steeda differential cooler kit is reversible so that you can return you Mustang to stock if there comes a time when you want to sell it. The system is designed to be nearly plug and play to make this an easy installation for anyone with basic mechanic and electrical knowledge.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003ePerfect for any build.\u003c\/span\u003e This system works with a wide range of builds. An excellent option for street cars that see track use, autocross builds, or even HPDE builds. We use this kit on our Q350 EcoBoost Mustang and our 2024 White HPDE Mustang build. Also by utilizing the factory mounting location, noise and odors from the cooler are kept out of the cabin, making this a good differential cooler to street\/track builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStraightforward installation\u003c\/li\u003e\n\u003cli\u003ePre-assembled -10AN hoses\u003c\/li\u003e\n\u003cli\u003eFord Genuine oil cooler assembly\u003c\/li\u003e\n\u003cli\u003eTilton pump\u003c\/li\u003e\n\u003cli\u003eWiring harness with relay, fuse, and switch included\u003c\/li\u003e\n\u003cli\u003eBrackets and hardware included for mounting in the factory location\u003c\/li\u003e\n\u003cli\u003eExpands differential fluid capacity by up to 1-1\/2 quarts\u003c\/li\u003e\n\u003cli\u003eExtends differential fluid, bearing, ring and pinion, and differential life\u003c\/li\u003e\n\u003cli\u003eMounts under the car to prevent noise and unpleasant smells in the cabin\u003c\/li\u003e\n\u003cli\u003eHelps you spend more time on the track instead of in the pits cooling\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2015 Mustang\u003c\/p\u003e\u003cp\u003e- 2016 Mustang\u003c\/p\u003e\u003cp\u003e- 2017 Mustang\u003c\/p\u003e\u003cp\u003e- 2018 Mustang\u003c\/p\u003e\u003cp\u003e- 2019 Mustang\u003c\/p\u003e\u003cp\u003e- 2020 Mustang\u003c\/p\u003e\u003cp\u003e- 2021 Mustang\u003c\/p\u003e\u003cp\u003e- 2022 Mustang\u003c\/p\u003e\u003cp\u003e- 2023 Mustang\u003c\/p\u003e\u003cp\u003e- 2024 Mustang\u003c\/p\u003e\u003cp\u003e- 2025 Mustang\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320692829,"sku":"555-3725","price":1607.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/P1080004_1__14072__83635.1740171722.jpg?v=1765078305"},{"product_id":"steeda-billet-front-tow-hook-2024-2026-mustang-555-5200","title":"Steeda Billet Front Tow Hook (2024 - 2026 Mustang) 555-5200","description":"\u003cp\u003eAdd a recovery point for track events and get track-inspired looks for the street with this billet front tow hook from Steeda!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProudly made in the USA.\u003c\/span\u003e This front tow hook is designed, engineered, and manufactured at Steeda's Valdosta, GA location. Precisely machined from billet aluminum and billet steel for exceptional strength and a great fit. The steel stud is nickel plated and the hardware is stainless steel so that the front tow hook will look great and withstand the elements.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eImpressive looks.\u003c\/span\u003e This front tow hook is an excellent way to set your Mustang apart from others on the street. Get track-ready looks and functionality with this tow hook.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eReady for the track.\u003c\/span\u003e Meeting the requirements of most track event sanctioning bodies, this front tow hook is an excellent way to prep your Mustang for the track.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProduct Benefits\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eCNC machined from billet aluminum and billet steel\u003c\/li\u003e\n\u003cli\u003eNickel plated stud and stainless steel hardware\u003c\/li\u003e\n\u003cli\u003eBuilt-in tension spring to hold the tow hook in position\u003c\/li\u003e\n\u003cli\u003eCompatible with S550s equipped with factory front tow hook attachment point\u003c\/li\u003e\n\u003cli\u003eCompatible with S650s equipped with factory front tow hook attachment point. EcoBoost Performance Package and GT Performance Package. \u003cspan\u003eWill not fit the Dark Horse.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment: \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2024 Mustang\u003c\/p\u003e\u003cp\u003e- 2025 Mustang \u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320758365,"sku":"555-5200","price":215.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/Steeda-555-5200-v1-1__89540__91456.1740171594.jpg?v=1765078307"},{"product_id":"steeda-two-piece-slotted-front-rotor-set-2024-2026-mustang-gt-dark-horse-555-6049","title":"Steeda Two-Piece Slotted Front Rotor Set (2024 - 2026 Mustang GT \/ Dark Horse) 555-6049","description":"\u003cp\u003eThese Steeda brake rotors are a premium upgrade for your 2024+ Mustang GT with the Brembo Package or Dark Horse. Based on the factory 2-piece brake rotors and modified in-house, these brake rotors are made to the same quality standards as your OEM brakes.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eBetter Performance.\u003c\/span\u003eA proprietary CNC-machined slotted groove pattern keeps pads cleaner and allows for outgassing and maximum grip without glazing. A unique directional vent design draws more air through the rotor core for improved cooling, stable disc temps, and a significant reduction in peak operating temperatures.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMachined In-House\u003c\/span\u003eAt their Valdosta, GA facility, Steeda machines the slots into the rotors. Machined on their CNC machines with a ball-end mill, Steeda is able to maintain excellent precision and quality control. By using a ball-end mill, the wear on the brake pads is significantly reduced so that you get more use and track time out of your brake pads.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFactory quality brake rotors.\u003c\/span\u003eBy using OEM rotors, you can be confident that these brake rotors will provide the best performance possible. No worries about cracking, warping, or glazing easier than the factory rotors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduces unsprung weight \u0026amp; rotating mass over the stock GT Performance Pack brake rotors\u003c\/li\u003e\n\u003cli\u003eGreatly reduces brake fade from outgassing brake pads\u003c\/li\u003e\n\u003cli\u003eShorter stopping distances under all conditions\u003c\/li\u003e\n\u003cli\u003eSlotted design keep pads cleaner and allows out-gassing\u003c\/li\u003e\n\u003cli\u003eReduced brake pad wear with ball-end milled slots\u003c\/li\u003e\n\u003cli\u003eFits Mustangs equipped with the brembo package and with 390mm\/15.34in front rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2024 Mustang GT\u003c\/p\u003e\u003cp\u003e- 2025 Mustang GT\u003c\/p\u003e\u003cp\u003e- 2024 Mustang Dark Horse\u003c\/p\u003e\u003cp\u003e- 2025 Mustang Dark Horse\u003c\/p\u003e\u003c!-- snippet location product_description --\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320823901,"sku":"555-6049","price":1354.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-6049-v1-1__10354__05977.1740171355.jpg?v=1765078312"},{"product_id":"steeda-slotted-rear-rotor-set-2024-2026-mustang-gt-dark-horse-555-6050","title":"Steeda Slotted Rear Rotor Set (2024 - 2026 Mustang GT \/ Dark Horse) 555-6050","description":"\u003cp\u003eThese Steeda brake rotors are a premium upgrade for your 2024+ Mustang GT with the Brembo Package or Dark Horse. Based on the factory rear brake rotors and modified in-house, these brake rotors are made to the same quality standards as your OEM brakes.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eBetter Performance.\u003c\/span\u003eA proprietary CNC-machined slotted groove pattern keeps pads cleaner and allows for outgassing and maximum grip without glazing. A unique directional vent design draws more air through the rotor core for improved cooling, stable disc temps, and a significant reduction in peak operating temperatures.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eMachined In-House\u003c\/span\u003eAt their Valdosta, GA facility, Steeda machines the slots into the rotors. Machined on their CNC machines with a ball-end mill, Steeda is able to maintain excellent precision and quality control. By using a ball-end mill, the wear on the brake pads is significantly reduced so that you get more use and track time out of your brake pads.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eFactory quality brake rotors.\u003c\/span\u003eBy using OEM rotors, you can be confident that these brake rotors will provide the best performance possible. No worries about cracking, warping, or glazing easier than the factory rotors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGreatly reduces brake fade from outgassing brake pads\u003c\/li\u003e\n\u003cli\u003eShorter stopping distances under all conditions\u003c\/li\u003e\n\u003cli\u003eSlotted design keep pads cleaner and allows out-gassing\u003c\/li\u003e\n\u003cli\u003eReduced brake pad wear with ball-end milled slots\u003c\/li\u003e\n\u003cli\u003eFits Mustangs equipped with the brembo package and with 355mm\/13.98in rear rotors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2024 Mustang GT\u003c\/p\u003e\u003cp\u003e- 2025 Mustang GT\u003c\/p\u003e\u003cp\u003e- 2024 Mustang Dark Horse\u003c\/p\u003e\u003cp\u003e- 2025 Mustang Dark Horse\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320889437,"sku":"555-6050","price":367.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-6050-v1-1__42017__16909.1740171261.jpg?v=1765078316"},{"product_id":"steeda-linear-drag-springs-2015-2026-mustang-gt-w-magneride-555-8233","title":"Steeda Linear Drag Springs (2015 - 2026 Mustang GT w\/ Magneride) 555-8233","description":"\u003ch2\u003eSteeda MagneRide Drag Springs – Linear (555-8233) - 2015-2026 Mustang\u003c\/h2\u003e \u003cp\u003eUnlock the full drag racing potential of your Mustang with the \u003cstrong\u003eSteeda MagneRide Drag Springs – Linear (555-8233)\u003c\/strong\u003e. Designed specifically for Mustangs equipped with MagneRide suspension, these springs deliver competition-proven performance while maintaining excellent street drivability. Whether you’re launching hard at the strip or cruising the highway, Steeda ensures you get the best of both worlds.\u003c\/p\u003e \u003cp\u003eThese springs provide the perfect balance between aggressive stance and optimized performance. For 2015–2023 models, expect a \u003cstrong\u003e0.75\" front drop and 0.5\" rear drop\u003c\/strong\u003e. On 2024+ S650 Mustangs, they provide a \u003cstrong\u003e0.5\" front drop and 0.75\" rear drop\u003c\/strong\u003e. With carefully engineered spring rates of \u003cstrong\u003e150 lb\/in front\u003c\/strong\u003e and \u003cstrong\u003e800 lb\/in rear\u003c\/strong\u003e, weight transfer is maximized for superior traction, giving you the edge at launch.\u003c\/p\u003e \u003cp\u003eDeveloped with advanced CAD data and Steeda’s decades of suspension expertise, these springs are the result of extensive testing with leading motorsport spring engineers. Pair them with Steeda’s Pro-Action shocks, struts, and other suspension upgrades for a track-ready package that dominates at the strip while staying smooth on the street.\u003c\/p\u003e \u003ch3\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cul\u003e \u003cli\u003eS550: 0.75\" front drop \/ 0.5\" rear drop\u003c\/li\u003e \u003cli\u003eS650: 0.5\" front drop \/ 0.75\" rear drop\u003c\/li\u003e \u003cli\u003eDesigned for Mustangs equipped with MagneRide suspension\u003c\/li\u003e \u003cli\u003eImproved weight transfer and traction at launch\u003c\/li\u003e \u003cli\u003eEngineered for drag racing yet retains excellent street comfort\u003c\/li\u003e \u003cli\u003eDeveloped with advanced CAD modeling and Steeda’s racing expertise\u003c\/li\u003e \u003cli\u003eBacked by Steeda’s limited LIFETIME warranty\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Lowered amount may vary depending on vehicle package and trim options.\u003c\/p\u003e \u003ch3\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/h3\u003e \u003cp style=\"padding-left: 30px;\"\u003e- 2015 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2016 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2017 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2018 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2019 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2020 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2021 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2022 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2023 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2024 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2025 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2026 Ford Mustang GT w\/ Magneride\u003c\/p\u003e \u003c!-- snippet location product_description --\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875320954973,"sku":"555-8233","price":379.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-555-8233-v1-1__46870__45290.1734965940.jpg?v=1765078319"},{"product_id":"steeda-rear-linear-drag-springs-2015-2026-mustang-gt-w-magneride-555-8234","title":"Steeda Rear Linear Drag Springs (2015 - 2026 Mustang GT w\/ Magneride) 555-8234","description":"\u003ch2\u003eSteeda Rear Linear Drag Springs (555-8234) - 2015-2026 Mustang GT w\/ Magneride\u003c\/h2\u003e\u003cp\u003eUnlock the true drag racing potential of your Mustang with \u003cstrong\u003eSteeda’s Rear Linear Drag Springs (555-8234)\u003c\/strong\u003e, engineered specifically for S550 and S650 models equipped with MagneRide suspension. Developed with competition in mind, these springs deliver unmatched weight transfer and traction during hard launches—while still maintaining a comfortable ride for the street.\u003c\/p\u003e\u003cp\u003eDesigned and tested by Steeda’s suspension experts, these springs offer a rear drop of \u003cstrong\u003e0.5” on 2015–2023 Mustangs\u003c\/strong\u003e and \u003cstrong\u003e0.75” on 2024+ models\u003c\/strong\u003e. With a linear 800 lb\/in spring rate, they strike the perfect balance between aggressive stance and performance-driven functionality. Whether you’re chasing better 60-foot times or simply want an improved drag strip setup, Steeda’s drag springs give you the edge.\u003c\/p\u003e\u003cp\u003ePair these springs with \u003cstrong\u003eSteeda Pro-Action shocks and struts\u003c\/strong\u003e for maximum performance gains and reduced wheel hop, squat, and body oscillation. Built using advanced CAD design and developed alongside top motorsport engineers, Steeda ensures you’re getting the most proven and reliable drag spring package available.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eS550: 0.5” rear drop\u003c\/li\u003e\n\u003cli\u003eS650: 0.75” rear drop\u003c\/li\u003e\n\u003cli\u003eEngineered for Mustangs with MagneRide suspension\u003c\/li\u003e\n\u003cli\u003eImproves weight transfer and rear traction for better launches\u003c\/li\u003e\n\u003cli\u003eDesigned for competition racing but remains street-friendly\u003c\/li\u003e\n\u003cli\u003eDeveloped with advanced CAD modeling for precision and durability\u003c\/li\u003e\n\u003cli\u003ePairs perfectly with Steeda Pro-Action shocks and struts\u003c\/li\u003e\n\u003cli\u003eBacked by Steeda’s limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Lowered amount may vary depending on vehicle package and trim options.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp style=\"padding-left: 30px;\"\u003e- 2015 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2016 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2017 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2018 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2019 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2020 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2021 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2022 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2023 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2024 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2025 Ford Mustang GT w\/ Magneride\u003cbr\u003e- 2026 Ford Mustang GT w\/ Magneride\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321020509,"sku":"555-8234","price":204.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-8234-v1-1__14449__61999.1755719545.jpg?v=1765078323"},{"product_id":"steeda-tri-ax-street-short-throw-shifter-tremec-tr-3160-2016-2026-mustang-gt350-mach-1-dark-horse-555-7319","title":"Steeda Tri-Ax Street Short Throw Shifter - Tremec TR-3160 (2016 - 2026 Mustang GT350 \/ Mach 1 \/ Dark Horse) 555-7319","description":"\u003cp\u003eSteeda's S550\/S650 Mustang Tri-Ax Street Short Throw Shifter for the 2016+ Mustang GT350, Mach 1, and Dark Horse dramatically improves your Mustang's gear shifting. Upgrade your Tremec TR-3160 transmission with this shift lever and make any drive more exciting.\u003c\/p\u003e\u003cp\u003eSteeda's TR-3160 Tri-Ax Street Short Throw Shifter uses a re-engineered pivot mechanism to provide a shorter throw and better shift feel. This shifter lever will provide a\u003cspan\u003e20% shorter throw\u003c\/span\u003eand is compatible with the factory shift knob and reverse lockout.\u003c\/p\u003e\u003cp\u003eThis straightforward install takes only about an hour and a half and you probably have all the tools you need sitting in your tool box. Dramatically improve your driving experience with this short throw shifter! Our Steeda Mustang Tri-Ax Street Short Throw Shifter is manufactured from high-strength 1018 steel and nickel-plated for the strongest, corrosion-resistant shift lever out there.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNote:\u003c\/span\u003eAccepts factory shift knobs and aftermarket knobs with M12 x 1.25 thread pitch. Easy to install and does not require any permanent modifications to your vehicle. Comes with a limited lifetime warranty!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProduct Benefits\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e20% throw reduction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH from stock shifter\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory reverse lockout and shift knob\u003c\/li\u003e\n\u003cli\u003eNo increase in shifter NVH (noise, vibration, harshness)\u003c\/li\u003e\n\u003cli\u003eRetains factory shift knob thread M12 x 1.25 pitch\u003c\/li\u003e\n\u003cli\u003eMade of nickel-plated high-strength 1018 steel\u003c\/li\u003e\n\u003cli\u003eComes with a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation Difficulty: Tech Recommended\u003c\/p\u003e\u003cdl class=\"productView-info-dl\"\u003e\u003cdt class=\"productView-info-name\"\u003eTools Required: Basic Shop Tools\u003c\/dt\u003e\u003c\/dl\u003e\u003cp\u003e\u003cspan style=\"font-style: italic;\"\u003eEstimated Install Time:\u003c\/span\u003e\u003cspan style=\"font-style: italic;\"\u003e(approx.) 1.5 Hours\u003c\/span\u003e\u003c\/p\u003e\u003cdl class=\"productView-info-dl\"\u003e\u003cdt class=\"productView-info-name\"\u003eVehicle Fitment: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024\u003c\/dt\u003e\u003c\/dl\u003e\u003cdl class=\"productView-info-dl\"\u003e\n\u003cdt class=\"productView-info-name\"\u003eVehicle Trim: Mach 1\u003c\/dt\u003e\n\u003cdt class=\"productView-info-name\"\u003eVehicle Trim: GT350\u003c\/dt\u003e\n\u003cdt class=\"productView-info-name\"\u003e\u003cspan style=\"font-style: italic;\"\u003eVehicle Trim: Dark Horse\u003c\/span\u003e\u003c\/dt\u003e\n\u003c\/dl\u003e\u003c!-- snippet location product_description --\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321118813,"sku":"555-7319","price":205.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/tri-ax-tr-3160-v1-1__98711__18692.1728480258.jpg?v=1765078328"},{"product_id":"steeda-rear-lower-control-arm-spherical-bearings-2024-2026-mustang-555-4141","title":"Steeda Rear Lower Control Arm Spherical Bearings (2024 - 2026 Mustang) 555-4141","description":"\u003cp\u003eNo deflection or NVH. From the factory, the S650 Ford Mustang features bushings in the rear control arm that we found to be less than ideal for putting all the 5.0L Coyote's power to the ground. The factory bushings deflect under hard launch or drag race applications conditions causing all sorts of issues that are less than ideal. With their spherical bushing construction, virtually all deflection is eliminated with Steeda's LCA bearing design. The spherical bearings design, unlike most, will not increase NVH (noise, vibration, or harshness) whatsoever so you are able to maintain factory ride quality.\u003c\/p\u003e\u003cp\u003eImproved suspension performance. Our Steeda S650 Mustang Rear Lower Control Arm Spherical Bearings eliminates deflection of the factory bushing which is extremely important in any performance application. Deflection in the factory bushings can cause all sorts of negative handling affects. Our spherical rear lower control arm will correct understeer under acceleration of your S650. You will notice increased chassis responsiveness upon installing our spherical bearings. If you drag race your GT, EcoBoost or Dark Horse Mustang our rear lower control arm spherical bearings will play a huge role in eliminating deflection, ensuring your tires hook immediately upon acceleration. Our spherical bearings stop your S650 from building negative toe on launch. In addition to eliminating deflection and compliance of the factory bushings, our spherical bearings will also eliminate the spring rate of the factory bushing which does not allow the suspension to articulate up and down freely.\u003c\/p\u003e\u003cp\u003eInstall tool included. Unlike other kits on the market, Steeda's includes a billet install \/ removal tool. The tool is compatible with either hydraulic or ball joint presses making the installation process painless from beginning to end.\u003c\/p\u003e\u003cp\u003eMade in USA. Our Steeda Mustang Rear Lower Control Arm Spherical Bearings are manufactured in our state of the art facility in Valdosta, GA from 1018-steel and nickel-plated to prevent corrosion. We use high precision Teflon-lined bearings to ensure smooth operation. This also increases the bearing's life and minimizes the need for it to be replaced.\u003c\/p\u003e\u003cp\u003eWe recommend these Spherical Bearings for ALL drag racing applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePair of rear lower control arm spherical bearings\u003c\/li\u003e\n\u003cli\u003eBillet aluminum removal \/ installation tool included\u003c\/li\u003e\n\u003cli\u003eReduced deflection\u003c\/li\u003e\n\u003cli\u003eReduced wheel hop\u003c\/li\u003e\n\u003cli\u003eNo NVH increase\u003c\/li\u003e\n\u003cli\u003eEliminates alignment change under power\u003c\/li\u003e\n\u003cli\u003eDecreases vehicle reaction times\u003c\/li\u003e\n\u003cli\u003eLimited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2024 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2025 Ford Mustang\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321217117,"sku":"555-4141","price":224.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-4141-v1-1__20284__11612.1727709631.jpg?v=1765078335"},{"product_id":"steeda-ultralite-2-point-g-trac-brace-2015-2026-mustang-555-5535","title":"Steeda Ultralite 2-Point G-Trac Brace (2015 - 2026 Mustang) 555-5535","description":"\u003cp\u003eSteeda's S550\/S650 Ultralight 2-Point G-Trac Brace is the lightweight stiffness champion. Pound for pound this brace adds more stiffness to your chassis front subframe than any other unit on the market. Our brace weighs in at a mere 4 lbs which is over 50% lighter than the competition.\u003c\/p\u003e\u003cp\u003eThe Steeda Ultralite 2-Point G-Trac Brace fits Mustang models from 2015 and up and was designed to complement the S550\/S650's suspension, while allowing the most versatility in aftermarket fitments - our brace even allows fitment for most long tube headers without affecting ground clearance! The kit comes with four shims to give you the perfect amount of header clearance with optimum ground clearance. This brace adds stiffness to your vehicle's front subframe in both bending and torsion, greatly reducing your wheels' suspension compliance!\u003c\/p\u003e\u003cspan\u003eProduct Benefits\u003c\/span\u003e\u003cul\u003e\n\u003cli\u003eImproves chassis stiffness and suspension compliance\u003c\/li\u003e\n\u003cli\u003eWeighs in at a mere 4 lbs, over 50% lighter than the competition\u003c\/li\u003e\n\u003cli\u003eExtremely compatible with other aftermarket components (headers, etc.)\u003c\/li\u003e\n\u003cli\u003eOffers clearance for aftermarket oil drain plugs.\u003c\/li\u003e\n\u003cli\u003eImproves vehicle response and predictability\u003c\/li\u003e\n\u003cli\u003eReduces tramlining\u003c\/li\u003e\n\u003cli\u003eInstalls in minutes\u003c\/li\u003e\n\u003cli\u003eAdjustable for additional header clearance\u003c\/li\u003e\n\u003cli\u003eMade in the USA, limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2015 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2016 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2017 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2018 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2019 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2020 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2021 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2022 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2023 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2024 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2025 Ford Mustang\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321315421,"sku":"555-5535","price":128.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-555-5535-v1-1__58391__80090.1727464560.jpg?v=1765078347"},{"product_id":"steeda-proflow-cold-air-intake-wo-filters-2024-2026-mustang-gt-dark-horse-555-3235","title":"Steeda ProFlow Cold Air Intake w\/o Filters (2024 - 2026 Mustang GT \/ Dark Horse) 555-3235","description":"\u003cp\u003e\u003cstrong\u003eTHIS PART # DOES NOT INCLUDE THE STEEDA 555-3219 AIR FILTERS.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eSteeda's ProFlow Cold Air Intake for the S650 Mustang opens up the intake system to let the 4th Generation Coyote V8 breathe. With massive CNC-machined mass air meters and custom molded silicone tubes, this intake will impress. Our proven CNC-machined billet mass air meter delivers a clean signal to your mass air sensor for excellent response and driveability when getting off and on the throttle. This kit can utilize the factory airbox lids to retain the ram air effect of the stock airboxes, or the lids can be removed for an open intake that makes a statement at any show you go to.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eDesigned for peak performance.\u003c\/span\u003e Utilizing decades of experience in tuning, designing cold air intakes, and racing Steeda has engineered this cold air intake to perform. The CNC-machined mass air meter is massive at over 4.25\" ID and allows for unrestricted airflow. Our custom-made 4-ply silicone intake tube starts at 4.75\" ID and necks down to 95mm to increase velocity and also allow for throttle body upgrades.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eTested and proven.\u003c\/span\u003e Steeda has tested this intake with different driving styles and situations to ensure compatibility with the factory programming. The result is an intake system that improves performance when installed, will not negatively affect drivability, and is ready to provide additional performance improvements when tuning becomes available.\u003c\/p\u003e \u003cp\u003ePurchase your Steeda ProFlow Mustang 5.0L Cold Air Intake for 2024+ S650 at ByePolr Performance today!\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eProduct Benefits:\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eOver 25% larger velocity intake tubes than the competition\u003c\/li\u003e \u003cli\u003eOver 6% larger mass air meter than the competition\u003c\/li\u003e \u003cli\u003eNo tune required\u003c\/li\u003e \u003cli\u003eTested on the street and track\u003c\/li\u003e \u003cli\u003e6061 billet aluminum mass air meters, CNC-machined in-house\u003c\/li\u003e \u003cli\u003eSuperior MAF sensor signal\u003c\/li\u003e \u003cli\u003e6061 billet aluminum PCV line fitting, CNC-machined in-house\u003c\/li\u003e \u003cli\u003eMaintains use of factory air boxes for ram air effect\u003c\/li\u003e \u003cli\u003eLower intake temps than competitors open air CAIs\u003c\/li\u003e \u003cli\u003eCan be run in a closed or open lid configuration\u003c\/li\u003e \u003cli\u003eSmooth surface finish on machined parts\u003c\/li\u003e \u003cli\u003eStainless steel hose clamps\u003c\/li\u003e \u003cli\u003eCustom-made 4-ply silicone hoses\u003c\/li\u003e \u003cli\u003e+13 peak hp, +11 peak tq over the leading competitor\u003c\/li\u003e \u003cli\u003eLimited lifetime warranty\u003c\/li\u003e \u003cli\u003eMade in the USA\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cspan\u003eWarning: Not approved for sale in California or states that require a California E.O. #.\u003c\/span\u003e This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eNote:\u003c\/span\u003e Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and\/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.\u003c\/p\u003e \u003cp\u003eThis limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.\u003c\/p\u003e \u003cp id=\"prop65\"\u003e\u003cimg src=\"https:\/\/www.steeda.com\/product_images\/images\/pages\/pages\/california-proposition-65\/warning.png\" alt=\"warning\"\u003e\u003cspan\u003eWARNING:\u003c\/span\u003e California Residents: Cancer and Reproductive Harm; \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" rel=\"nofollow\" target=\"_blank\"\u003ewww.p65warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321413725,"sku":"555-3235","price":588.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-3234-v1-4__43936__48235.1726068857.jpg?v=1765078350"},{"product_id":"steeda-vertical-links-delrin-bush-2024-2026-mustang-pp-brembo-2020-2022-gt500-555-4130","title":"Steeda Vertical Links Delrin Bush (2024 - 2026 Mustang PP \u0026 Brembo \/ 2020 - 2022 GT500) 555-4130","description":"\u003cp\u003eLeave the starting line faster and reduce wheel hop when launching with Steeda upgraded vertical links. These Steeda vertical links are CNC machined from 6061 aircraft-grade aluminum and use CNC machined Delrin bushings to prevent any flex in the vertical links that would contribute to wheel hop. \u003c\/p\u003e\u003cdiv\u003eWheel hop is generated when the tires of your Mustang or GT500 lose traction and suddenly regain traction. Flex in the suspension can change the angle of toe and contributes to the loss of traction and amplifies the wheel hop when you launch. By reducing or eliminating the flex in the IRS of the S550\/S650 platform, you can launch smooth and safe without wheel hop.\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003ePrecise machining and sturdy construction that you can trust. The Steeda aluminum vertical links and Delrin bushings are CNC machined to precise measurements in order to maintain the OE suspension geometry and retain the incredible handling that the Mustang\/GT500 offers.\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eHeavy-duty materials used and ensure a durable part. The vertical links are made from 6061 aircraft-grade aluminum for a lightweight and strong product. The Delrin bushings reduce flex, have high tensile strength, and have a natural lubricity. Billet steel bushing sleeves and spacers provide additional strength and durability.\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eProduct Benefits:\u003c\/div\u003e\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003eReduces wheel hop\u003c\/li\u003e\n\u003cli\u003eEasy installation\u003c\/li\u003e\n\u003cli\u003eNo flex under load\u003c\/li\u003e\n\u003cli\u003eMade in house in the USA\u003c\/li\u003e\n\u003cli\u003eNo additional noise, vibration, and harshness\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2020 Ford Mustang GT500\u003c\/p\u003e\u003cp\u003e- 2021 Ford Mustang GT500\u003c\/p\u003e\u003cp\u003e- 2022 Ford Mustang GT500\u003c\/p\u003e\u003cp\u003e- 2024 Ford Mustang Performance Package\u003c\/p\u003e\u003cp\u003e- 2024 Ford Mustang Brembo Package\u003c\/p\u003e\u003cp\u003eNote: Only fits S550 GT500's. Fits Performance Package and Brembo Package S650 Mustangs. For Non-Brembo Package (single piston rear caliper) 2024+ Mustangs see \u003ca href=\"https:\/\/www.beefcakeracing.com\/steeda-555-4129\/\"\u003e555-4129\u003c\/a\u003e or \u003ca href=\"https:\/\/www.beefcakeracing.com\/steeda-555-4121\/\"\u003e555-4121\u003c\/a\u003e.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321544797,"sku":"555-4130","price":388.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-4130-1__67786__70729.1723168323.jpg?v=1765078353"},{"product_id":"steeda-competition-front-rear-sway-bar-kit-2015-2026-mustang-555-1036","title":"Steeda Competition Front \u0026 Rear Sway Bar Kit (2015 - 2026 Mustang) 555-1036","description":"\u003cp\u003eIf you have a track or competition-built vehicle, this competition sway bar has been designed to meet your needs. Pairing our 555-1015 front sway bar with our 555-1034 rear sway bar, you get the same combo that we use to dominate the track. Steeda's front sway bar is 42-97% stiffer than the OE Performance Pack sway bar, depending on the hole that you select. The rear sway bar is adjustable, and with a softer rate than any of our other sway bars, this bar gives you the ability to run stiffer springs and other track-purpose parts on the car.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eDesigned for racing.\u003c\/span\u003e These sway bars work alongside your track-focused upgrades to maximize performance. The front bar is designed to provide more stable cornering and reduced body roll. The corner exit grip of your S550\/S650 Mustang is increased by not lifting the inside rear tire during cornering. Engineered to work with higher spring rates, multi-adjustable shocks, and aerodynamic upgrades (wings). This kit is an excellent addition for both open track and auto-cross events. Installed on our 2024 Mustang GT HPDE build along with our 'Stop The Hop' Handling Ultimate Kit, we achieved over a 2 second improvement in our lap times!\u003c\/p\u003e \u003cp\u003eRelocation brackets. The included relocation brackets move the rear sway bar to provide greater clearance between the sway bar, other suspension parts, and brake components. Sway bar geometry is also improved by moving the bar rearward and putting the end links in a more vertical position. This increases the sway bar adjustability range, especially when pairing with adjustable end links. The more vertical position also prevents binding of the end links. End link binding can artificially and inconsistently increase the rate of the sway bar.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDesigned to work with track-focused parts\u003c\/li\u003e \u003cli\u003eAdjustable for fine tuning\u003c\/li\u003e \u003cli\u003eBillet steel machined ends\u003c\/li\u003e \u003cli\u003eLess prone to fatigue, cracking, unwanted deflection, and failure\u003c\/li\u003e \u003cli\u003eUp to 97% stiffer than OE Performance Pack front sway bar\u003c\/li\u003e \u003cli\u003eUp to 39% softer than our standard rear sway bars\u003c\/li\u003e \u003cli\u003eHelps with corner exit grip\u003c\/li\u003e \u003cli\u003eExcellent for open track and autocross\u003c\/li\u003e \u003cli\u003eImproved suspension geometry\u003c\/li\u003e \u003cli\u003eIncludes hardware and rear relocation brackets\u003c\/li\u003e \u003cli\u003eOur 2024+ HPDE build achieved over a 2-second improvement in lap times when combined with our 'Stop The Hop' Handling Ultimate Kit\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cspan\u003eNote:\u003c\/span\u003e\u003cspan\u003e Front Sway bar will fit vehicles equipped with MagneRide Suspension but cannot be used at softest setting due to contact with factory ride height sensor.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFitment: \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e- 2015 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2016 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2017 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2018 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2019 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2020 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2021 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2022 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2023 Ford Mustang\u003c\/p\u003e \u003cp\u003e- 2024 Ford Mustang\u003c\/p\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321610333,"sku":"555-1036","price":680.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-555-1036-v2-1__57564__15457.1721658706.jpg?v=1765078355"},{"product_id":"steeda-clutch-spring-assist-35lbin-2024-2026-ford-mustang-s650-555-7033","title":"Steeda Clutch Spring Assist 35lb\/in (2024 - 2026 Ford Mustang S650) 555-7033","description":"\u003cp\u003eYour 2024+ Mustang comes with a 130 lb\/in clutch assist spring installed from the factory. This high-rate spring is what causes such a vague and disconnected clutch pedal feel. The clutch pedal travels in a circular arc, with the spring assist in the middle of that clutch pedal travel. The middle of that motion compresses the spring initially and then allows it to extend after the first 30 degrees of travel. The combination of a high-rate assist spring and motion of the pedal during engagement causes a non-linear and sometimes confusing pedal feel. Having a non-linear pedal feel makes it difficult to modulate the clutch on your Mustang GT.\u003c\/p\u003e\u003cp\u003eMany new Mustang owners have found that taking out the stock spring will give you somewhat similar results, but realistically the clutch becomes far too heavy especially if your Mustang is daily driven. Most owners fail to realize the prolonged effects of simply taking out your factory OE spring and not replacing it with another spring. By negating your factory clutch assist spring you will notice chatter\/NVH from your clutch pedal. Your clutch pedal will never fully return to stock position without any assist spring, and over time your slave cylinder may begin leaking due to constant pressure on its seals from the clutch pedal not returning to the stock position. Avoid these problems in the future by installing our Steeda Ford Mustang Clutch Spring Assist 35 lb\/in into your GT.\u003c\/p\u003e\u003cp\u003eOur Steeda S650 Mustang Clutch Assist Spring 35 lb\/in completely replaces the factory 130 lb\/in assist spring. Our engineers have honed in on just the right amount of spring rate to get you the perfect clutch pedal feel you look for in a Mustang. This assist spring is manufactured from piano wire that naturally has high tensile strength and high elastic qualities. Our piano wire spring ensures a consistent spring rate and minimal sag even after repeated use. With the addition of our clutch assist spring, you will notice a much more linear feeling clutch - the reason being is that we take out much of the influence involved in your clutch pedal motion caused by the assist spring, allowing you to feel exactly what is happening with your clutch engagement.\u003c\/p\u003e\u003cp\u003ePurchase your Steeda S650 Mustang Clutch Assist Spring 35 lb\/in for your 2024+ Mustang GT at Steeda Autosports today!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProduct Benefits\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImprove clutch pedal engagement feel\u003c\/li\u003e\n\u003cli\u003eModulate your clutch engagement with ease\u003c\/li\u003e\n\u003cli\u003ePiano wire construction with high tensile strength and high elastic qualities\u003c\/li\u003e\n\u003cli\u003eConsistent spring rate and minimal sag even after repeated use\u003c\/li\u003e\n\u003cli\u003eMore linear clutch feel\u003c\/li\u003e\n\u003cli\u003eComplete replacement of factory 130 lb\/in clutch assist spring\u003c\/li\u003e\n\u003cli\u003eAvoid slave cylinder damage due to removal of stock clutch spring\u003c\/li\u003e\n\u003cli\u003eSteeda quality, backed by a limited lifetime warranty\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- snippet location product_description --\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875321675869,"sku":"555-7033","price":32.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-555-7033-v1-1__01006__55783.1710422917.jpg?v=1765078361"},{"product_id":"steeda-dual-rate-hpde-suspension-pack-2015-2026-mustang-555-2357","title":"Steeda Dual Rate HPDE Suspension Pack (2015 - 2026 Mustang) 555-2357","description":"\u003cp\u003eIf your S550 Mustang spends more time turning laps than grabbing groceries, Steeda's S550 Mustang Dual Rate HPDE Suspension Package is your ticket to victory lane! A race proven kit which has laid down impressive times with Steeda's own 2016 and 2017 Mustangs, the HPDE Package comes with Front and Rear Adjustable Sway Bars, Adjustable Pro-Action Shocks and Struts, and Competition Dual Rate Springs.\u003c\/p\u003e\u003cp\u003eOur Steeda Mustang Front and Rear Sway Bars for your 2015+ Mustang GT, EcoBoost, or V6 provide an increase in front and rear roll stiffness for a balanced handling package. The press-fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the Steeda Mustang Front and Rear Sway Bar ends makes for far greater strength for a bulletproof sway bar. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.\u003c\/p\u003e\u003cp\u003eOur Pro-Action Adjustable dampers feature street and track-proven technology which have been methodically tested and tuned to achieve optimum compression valving, giving you that quick sports car reaction on the road with easily adjustable rebound damping at the twist of a knob. From soft and comfortable to stiff and aggressive, these Pro-Action shocks have more adjustability than you will ever need!\u003c\/p\u003e\u003cp\u003eThe Dual Rate Competition Springs, which have the highest rates on the market, greatly reduce nosedive and keep body roll to a minimum for the ultimate in performance handling. By lowering your S550 Mustang .750\" all around, these springs provide an optimized center of gravity and an aggressive stance.\u003c\/p\u003e\u003cp\u003eCompetition proven in both NASA and SCCA events, this suspension package is going to make your 2015+ S550 Mustang an absolute winner on the track! Installed on our 2024 Mustang GT HPDE build along with our 'Stop The Hop' Handling Ultimate Kit, we achieved over a 2 second improvement in our lap times!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteeda Pro-Action Shocks and Struts - Adjustable (\u003cspan\u003e555 8157\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eSteeda S550 Mustang Competition Dual Rate Springs (\u003cspan\u003e555 8246\u003c\/span\u003e)\u003c\/li\u003e\n\u003cli\u003eSteeda S550 Mustang Front and Rear Competition Sway Bars (\u003cspan\u003e555 1036\u003c\/span\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eProduct Benefits:\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLowers the vehicle .750\" at all 4 corners\u003c\/li\u003e\n\u003cli\u003eDesigned for competition racing but maintains outstanding street-able ride\u003c\/li\u003e\n\u003cli\u003eSteeda proprietary shock valving\u003c\/li\u003e\n\u003cli\u003eShocks \u0026amp; Struts Specifically designed for lowered S550 Mustangs\u003c\/li\u003e\n\u003cli\u003eRebound adjustable shocks \u0026amp; struts for the ultimate in tunability\u003c\/li\u003e\n\u003cli\u003eFront Sway Bar diameter 1-3\/8\"\u003c\/li\u003e\n\u003cli\u003eRear Sway Bar diameter 7\/8\"\u003c\/li\u003e\n\u003cli\u003eReduced body roll\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eNote:\u003c\/span\u003e Front Sway bar will not fit vehicles equipped with MagneRide Suspension.\u003cspan\u003e \u003c\/span\u003eThe factory shock mount will need to be drilled out to 12mm or the Steeda Billet Shock Mounts can be used.\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"No Thanks \/ No Thanks \/ No Thanks","offer_id":43875321741405,"sku":"555-2357-1","price":2248.51,"currency_code":"USD","in_stock":true},{"title":"No Thanks \/ No Thanks \/ Yes, Add Adjustable Bumpstop Kit [555-4445] (+$74.95)","offer_id":43875321774173,"sku":"555-2357-2","price":2248.51,"currency_code":"USD","in_stock":true},{"title":"No Thanks \/ Yes, Add Steeda Camber Plates [555-8139] (+$399.95) \/ No Thanks","offer_id":43875321806941,"sku":"555-2357-3","price":2248.51,"currency_code":"USD","in_stock":true},{"title":"No Thanks \/ Yes, Add Steeda Camber Plates [555-8139] (+$399.95) \/ Yes, Add Adjustable Bumpstop Kit [555-4445] (+$74.95)","offer_id":43875321839709,"sku":"555-2357-4","price":2248.51,"currency_code":"USD","in_stock":true},{"title":"Yes, Please add Billet Shock Mounts [555-8152] (+$299.95) \/ No Thanks \/ No Thanks","offer_id":43875321872477,"sku":"555-2357-5","price":2248.51,"currency_code":"USD","in_stock":true},{"title":"Yes, Please add Billet Shock Mounts [555-8152] (+$299.95) \/ No Thanks \/ Yes, Add Adjustable Bumpstop Kit [555-4445] (+$74.95)","offer_id":43875321905245,"sku":"555-2357-6","price":2248.51,"currency_code":"USD","in_stock":true},{"title":"Yes, Please add Billet Shock Mounts [555-8152] (+$299.95) \/ Yes, Add Steeda Camber Plates [555-8139] (+$399.95) \/ No Thanks","offer_id":43875321938013,"sku":"555-2357-7","price":2248.51,"currency_code":"USD","in_stock":true},{"title":"Yes, Please add Billet Shock Mounts [555-8152] (+$299.95) \/ Yes, Add Steeda Camber Plates [555-8139] (+$399.95) \/ Yes, Add Adjustable Bumpstop Kit [555-4445] (+$74.95)","offer_id":43875321970781,"sku":"555-2357-8","price":2248.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555_2357__86854__37416.1709757299.jpg?v=1765078365"},{"product_id":"steeda-pro-flow-air-filters-pair-2024-2026-mustang-gt-dark-horse-555-3219","title":"Steeda Pro Flow Air Filters - Pair (2024 - 2026 Mustang GT \/ Dark Horse) 555-3219","description":"\u003cp\u003eA direct replacement and upgrade that improves airflow and power, these Steeda 2024+ Mustang 5.0L air filters are the perfect way to take your muscle car up a notch!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eExceptional performance.\u003c\/span\u003e Through extensive real-world testing and development, the Steeda team has refined these air filters to deliver optimized performance. The surface area of the filter is larger than the stock filter and other aftermarket options, allowing for more airflow!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eDurable.\u003c\/span\u003e Washable and reusable, these filters are a cost effective upgrade. No need to purchase replacement air filters when servicing your Mustang. These filters will provide long lasting filtration and performance for your S650.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eDyno-proven Gains.\u003c\/span\u003e Adding up to 3hp and 2lb-ft of torque on the dyno, these air filters deliver proven results. On the track or at the strip, these air filters are able to maximize the flow of the high-pressure air being rammed into the factory air boxes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWashable \u0026amp; reusable\u003c\/li\u003e\n\u003cli\u003eIncreased airflow\u003c\/li\u003e\n\u003cli\u003eUp to 3hp and 2lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eUpgrade for the factory filters\u003c\/li\u003e\n\u003cli\u003eMaximizes airflow in the factory air boxes\u003c\/li\u003e\n\u003cli\u003eIncludes 2 air filters\u003c\/li\u003e\n\u003cli\u003eFits Mustang GT and Dark Horse\u003c\/li\u003e\n\u003cli\u003eInterchange Numbers: 93912, PR3Z9601A, PR3Z-9601-A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp style=\"text-align: center;\"\u003e\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875322036317,"sku":"555-3219","price":165.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-555-3219-v1-1__04337__23633.1708358694.jpg?v=1765078367"},{"product_id":"steeda-stop-the-hop-drag-enthusiast-kit-2015-2026-mustang-555-4456-d","title":"Steeda Stop the Hop Drag Enthusiast Kit (2015 - 2026 Mustang) 555-4456-D","description":"\u003cp\u003eOur Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop in drag racing while also staying on a tight budget. This is where the Stop the Hop Drag Enthusiast Kit comes in. Our team of engineers got together and came up with the best parts for eliminating unwanted wheel hop in the new S550\/S650 Mustang to help you get a better time at the drag strip. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003cbr\u003e\u003cbr\u003eSecond is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of its kind in the performance aftermarket and so innovative and popular we patented its design! Made in-house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. Its job is to prevent up and down movements of the subframe.\u003cbr\u003e\u003cbr\u003eThe 3rd component of this kit is the strongest support brace for the S550\/S650 IRS on the market!! Made in house from chrome-moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt-in design, this brace ties the subframe to the chassis in the best possible way.\u003cbr\u003e\u003cbr\u003eThe 4th piece is Steeda's rear lower control arm spherical bushings which are recommended for all drag race applications. If you drag race your GT, EcoBoost, or V6 Mustang our rear lower control arm spherical bearings will play a huge role in eliminating deflection, ensuring your tires hook immediately upon acceleration. Our spherical bearings stop your Mustang from building negative toe on launch. In addition to eliminating deflection and compliance of the factory bushings, our spherical bearings will also eliminate the spring rate of the factory bushing which does not allow the suspension to articulate up and down freely.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eThe 5th piece included in this kit is the impressive Steeda Adjustable Rear Camber Arms. These help you dial in that track alignment, correct camber after lowering your Mustang, and help you get a better contact patch at the track. These are CNC machined from 6061 aluminum and offer +2 through -5 degrees of adjustment.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNOTE: Steeda IRS Subframe support braces will not fit convertible\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cspan\u003eKit Includes:\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e555-5754\u003c\/span\u003e - Steeda IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4438\u003c\/span\u003e - Steeda IRS Subframe Alignment Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4437\u003c\/span\u003e - Steeda IRS Subframe Bushing Support System\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4123\u003c\/span\u003e - Steeda Rear Adjustable Camber Arms\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e555-4117\u003c\/span\u003e - Steeda Rear Lower Control Arm Spherical Bearings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003e\u003cspan\u003eProduct Benefits:\u003c\/span\u003e\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEliminate wheel hop while not increasing NVH\u003c\/li\u003e\n\u003cli\u003eEliminate subframe movement\u003c\/li\u003e\n\u003cli\u003eSimple install\u003c\/li\u003e\n\u003cli\u003eSquares subframe to the chassis\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications\u003c\/li\u003e\n\u003c\/ul\u003e\u003c!-- snippet location product_description --\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title \/ Default Title","offer_id":43875322069085,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-4456-D-v2-1__41544__29532.1696946112.jpg?v=1765078407"},{"product_id":"steeda-nurburg-suspension-package-2015-2026-mustang-w-magneride-555-2155","title":"Steeda Nurburg Suspension Package (2015 - 2026 Mustang w\/ MagneRide) 555-2155","description":"\u003ch2\u003eSteeda Nurburg Package (555-2155) – 2015-2026 Mustang w\/ Magneride\u003c\/h2\u003e\u003cp\u003eTake your Mustang’s handling to legendary levels with the \u003cstrong\u003eSteeda Nurburg Package\u003c\/strong\u003e, inspired by the record-setting performance of the Steeda Q767 Mach 1 at the Nürburgring. This kit is engineered to transform your MagneRide-equipped Mustang into a track weapon, delivering race-proven suspension upgrades that balance precision, agility, and stability—without sacrificing drivability.\u003c\/p\u003e\u003cp\u003eEvery component in this package has been track tested and fine-tuned by Steeda’s engineering team. From tighter cornering to improved turn-in response and faster lap times, the Nurburg Package brings the same competitive edge that helped Steeda’s Mach 1 overtake cars costing twice as much.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteeda Mustang Competition Front \u0026amp; Rear Sway Bar Kit (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-1036\/\"\u003e555-1036\u003c\/a\u003e)\u003c\/strong\u003e – Up to 97% stiffer front and optimized rear rates with billet steel ends for ultimate strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteeda Mustang Camber Plates (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-8139\/\"\u003e555-8139\u003c\/a\u003e)\u003c\/strong\u003e – Adds up to 3° of camber adjustment for sharper turn-in, reduced understeer, and maximum lateral grip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteeda Mustang MagneRide Dual Rate Ultimate Handling Lowering Springs (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-8243\/\"\u003e555-8243\u003c\/a\u003e)\u003c\/strong\u003e – Race-proven springs tested in SCCA \u0026amp; NASA competition, lowering your Mustang approx. 0.5\" at all four corners.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cul\u003e\n\u003cli\u003eTransforms MagneRide-equipped Mustangs into track-ready machines\u003c\/li\u003e\n\u003cli\u003eFront sway bar up to 97% stiffer than OE PP GT bar\u003c\/li\u003e\n\u003cli\u003eRear sway bar optimized up to 39% softer than Steeda’s standard rear bars for better balance\u003c\/li\u003e\n\u003cli\u003eAdjustable billet sway bar ends for durability and fine-tuning\u003c\/li\u003e\n\u003cli\u003eCamber plates increase cornering performance and eliminate understeer\u003c\/li\u003e\n\u003cli\u003eDual rate springs tested by professional racers for superior handling\u003c\/li\u003e\n\u003cli\u003eProven on Steeda’s Nürburgring-tested Q767 Mach 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/ul\u003e\u003cp\u003eIf you’re chasing faster lap times, sharper response, and the confidence to push your Mustang harder than ever, the Steeda Nurburg Package is your all-in-one solution to track domination.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp style=\"padding-left: 30px;\"\u003e- 2015 Ford Mustang\u003cbr\u003e- 2016 Ford Mustang\u003cbr\u003e- 2017 Ford Mustang\u003cbr\u003e- 2018 Ford Mustang\u003cbr\u003e- 2020 Ford Mustang\u003cbr\u003e- 2021 Ford Mustang\u003cbr\u003e- 2022 Ford Mustang\u003cbr\u003e- 2023 Ford Mustang\u003cbr\u003e- 2024 Ford Mustang\u003cbr\u003e- 2025 Ford Mustang\u003cbr\u003e- 2026 Ford Mustang\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875322167389,"sku":"555-2155","price":1565.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-555-2155-v1-1__71419__53999.1755721005.jpg?v=1765078432"},{"product_id":"steeda-pro-action-double-adj-rear-shocks-2015-2026-mustang-555-8426","title":"Steeda Pro-Action Double Adj Rear Shocks (2015 - 2026 Mustang) 555-8426","description":"\u003cp\u003eDo you want more from your Mustang's rear suspension? Are you after better handling on the street and at the track? Steeda's Pro-Action Double-Adjustable Rear Shocks are designed to give you more adjustability, greater control, improved traction, and lower times!\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProven performance.\u003c\/span\u003e Steeda has extensively tested and tuned these rear shocks, proving their capabilities with our record-breaking Silver Bullet. These shocks are not limited to the dragstrip, though. The valving allows for excellent adjustability, and these will be a step up from single adjustable rear shocks if you are looking for an upgrade on your autocross or HPDE S550.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eSuperior technology.\u003c\/span\u003e These dampers are packed with more advanced technology than other adjustable shocks in this price range. When adjusted, the oil flow is controlled at the piston for a 100% range of motion. Other brands use needle valves that can limit adjustability and narrow the adjustment range. Rebound damping is adjusted at the shock's top and stiffened by turning the adjuster counter-clockwise. Compression damping is adjusted at the bottom of the shock and is stiffened by turning the adjuster clockwise.\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eProduct Benefits:\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProven performance on our record-breaking Silver Bullet drag racing car\u003c\/li\u003e\n\u003cli\u003eWider range of adjustability that makes these great for various racing events.\u003c\/li\u003e\n\u003cli\u003eRecommended for anyone drag racing, pairs well with rear ride height adjusters\u003c\/li\u003e\n\u003cli\u003eOil flow adjusted at the piston for more adjustability\u003c\/li\u003e\n\u003cli\u003eWorks with stock height or lowering springs\u003c\/li\u003e\n\u003cli\u003eAllows you to fine-tune handling to lower your times at the track\u003c\/li\u003e\n\u003cli\u003eHelps you improve traction on the dragstrip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eNote:\u003c\/span\u003e\u003cspan\u003e Will \u003cstrong\u003enot\u003c\/strong\u003e fit MagneRide equipped cars. Factory mounts must be drilled to 12mm, or 12mm Steeda billet shock mounts can be used. If your shock is adjusted to full stiff or full soft, it is recommended that you turn it back about 1\/16th of a turn to prevent jamming the adjuster.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2015 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2016 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2017 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2018 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2019 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2020 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2021 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2022 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2023 Ford Mustang\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875322232925,"sku":"555-8426","price":863.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-555-8426-v1-1__21080.1682129967.jpg?v=1765078436"},{"product_id":"steeda-handling-ultimate-stop-the-hop-kit-2015-2026-mustang-555-2129-h","title":"Steeda Handling Ultimate Stop the Hop Kit (2015 - 2026 Mustang) 555-2129-H","description":"\u003cp\u003e\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eManufacturer Logo\u003cbr\u003eOur Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop and improve the handling of their Mustang. This is where the Stop the Hop Handling Ultimate Kit comes in. Our team of engineers got together and came up with the best parts for eliminating unwanted wheel hop and bushing deflection in the new S550 Mustang to help you take corners faster and get tack sharp handling. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the S550 chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003c\/p\u003e\u003cp\u003eSecond is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of its kind in the performance aftermarket and so innovative and popular we patented its design! Made in-house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. Its job is to prevent up and down movements of the subframe.\u003c\/p\u003e\u003cp\u003eThe 3rd component of this kit is the strongest support brace for the S550 IRS on the market!! Made in-house from chrome-moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt-in design, this brace ties the subframe to the chassis in the best possible way.\u003c\/p\u003e\u003cp\u003eSteeda's Rear Toe Links are the 4th item in the kit. They help you improve your launch and allows you to control the toe of your Mustang during launches. Improve your 60-foot times and get down track faster with this upgrade from Steeda.\u003c\/p\u003e\u003cp\u003e5th in the kit, the Steeda Billet Vertical Links with Urethane Bushings reduce deflection and tighten the rear of your S550. This CNC machined 6061 billet aluminum piece is a great step up over the stamped factory piece. Reducing bushing deflection will help you put more power to the ground and improve control, while also preventing unwanted movement and wheel hop. Bushing deflection from the stock rubber bushings can cause sloppy or soft handling and will hold your Ford back from reaching its full potential.\u003c\/p\u003e\u003cp\u003eThe 6th piece is Steeda's Adjustable Differential Bushing Insert System. These polyurethane bushings replace the soft rubber factory bushings that result in pinion changes, differential movement, and wheel hop. This will improve handling by helping to keep the rear of your S550 connected. You can expect some increase in NVH and may experience increased transfer of gear whine noise problematic to some Super 8.8 IRS differentials.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e Steeda IRS Subframe support braces will not fit convertible.\u003cspan\u003eCoupe fitment only.\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eWill not fit 2024+ Mustang equipped with Brembo brakes\u003c\/strong\u003e. Kit not compatible with GT500.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e555-5754 - Steeda IRS Subframe Support Braces\u003cbr\u003e555-4443 - Steeda Adjustable Differential Bushing Insert System\u003cbr\u003e555-4438 - Steeda IRS Subframe Alignment Kit\u003cbr\u003e555-4437 - Steeda IRS Subframe Bushing Support System\u003cbr\u003e555-4129 - Steeda Billet Aluminum Vertical Links with Urethane Bushings\u003cbr\u003e555-4120 - Steeda Adjustable Rear Toe Links\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003cbr\u003eEliminate wheel hop \u003cbr\u003eMay increase NVH (gear noise)\u003cbr\u003eEliminate subframe movement\u003cbr\u003eMinimizes differential movement\u003cbr\u003eSimple install\u003cbr\u003eSquares subframe to the chassis\u003cbr\u003eNo permanent modifications\u003cbr\u003eMore predictable handling\u003cbr\u003eGreater control and stability\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title \/ Default Title","offer_id":43875322298461,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/Steedaultamatehandling__33495.1667232918.jpg?v=1765078443"},{"product_id":"steeda-drag-ultimate-irs-stop-the-hop-kit-2015-2026-mustang-555-2129-d","title":"Steeda Drag Ultimate IRS Stop the Hop Kit (2015 - 2026 Mustang) 555-2129-D","description":"\u003cp\u003eOur ByePolr Performance Sales Experts take calls all the time from enthusiasts that want to eliminate wheel hop in drag racing. This is where the Steeda Stop the Hop Drag Ultimate Kit comes in. Our team of engineers got together and came up with the best parts for eliminating unwanted wheel hop in the new S550 Mustang to help you get the best time possible at the drag strip. A kit that gives you the fundamental foundation for ultimate traction and suspension compliance. As we have explained before, the factory IRS subframe, (often inaccurately referred to as a cradle), mounts to the S550 \u0026amp; S650 chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eProduct Benefits:\u003c\/strong\u003e\u003cbr\u003eEliminate wheel hop\u003cbr\u003eEliminate subframe movement\u003cbr\u003eSimple install\u003cbr\u003eSquares subframe to the chassis\u003cbr\u003eNo permanent modifications\u003cbr\u003eBetter 60-foot times\u003cbr\u003eAllows you to dial in the suspension for faster quarter-mile times\u003cbr\u003ePuts more energy into launching your S550 \u0026amp; S650\u003cbr\u003eGives you more control over your suspension with adjustable components\u003c\/p\u003e \u003cp\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003c\/p\u003e \u003cp\u003eSecond is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of its kind in the performance aftermarket and so innovative and popular we patented its design! Made in-house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. Its job is to prevent up and down movements of the subframe.\u003c\/p\u003e \u003cp\u003eThe 3rd component of this kit is the strongest support brace for the S550 \u0026amp; S650 IRS on the market!! Made in house from chrome-moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt-in design, this brace ties the subframe to the chassis in the best possible way.\u003c\/p\u003e \u003cp\u003eThe 4th piece is Steeda's rear lower control arm spherical bushings which are recommended for all drag race applications. If you drag race your GT, EcoBoost, or V6 Mustang our rear lower control arm spherical bearings will play a huge role in eliminating deflection, ensuring your tires hook immediately upon acceleration. Our spherical bearings stop your S550 from building negative toe on launch. In addition to eliminating deflection and compliance of the factory bushings, our spherical bearings will also eliminate the spring rate of the factory bushing which does not allow the suspension to articulate up and down freely.\u003c\/p\u003e \u003cp\u003eThe 5th piece included in this kit is the impressive Steeda Adjustable Rear Camber Arms. These help you dial in that track alignment, correct camber after lowering your Mustang, and help you get a better contact patch at the track. These are CNC machined from 6061 aluminum and offer +2 through -5 degrees of adjustment.\u003c\/p\u003e \u003cp\u003eSteeda's Rear Toe Links are the 6th item in the kit. They help you improve your launch and allows you to control the toe of your Mustang during launches. Improve your 60-foot times and get down track faster with this upgrade from Steeda.\u003c\/p\u003e \u003cp\u003e7th in the kit, the Steeda Billet Vertical Links with Delrin Bushings prevents deflection and stiffens the rear of your S550. This CNC machined 6061 billet aluminum piece is a great step up over the stamped factory piece. Reducing bushing deflection will help you put more power to the ground, while also preventing unwanted movement and wheel hop. Bushing deflection from the stock rubber bushings can cost your Mustang energy at launch and will hold your Ford back from reaching its full potential.\u003c\/p\u003e \u003cp\u003eThe 8th and final piece of this kit is the Ford Performance Knuckle to Toe Link Assembly. This replaces the factory rubber bushing and, like above, reduces deflection. This part will improve the handling and help your Mustang perform at its best.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: Steeda IRS Subframe support braces will not fit convertible\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e555-5754 - Steeda IRS Subframe Support Braces\u003cbr\u003e555-4438 - Steeda IRS Subframe Alignment Kit\u003cbr\u003e555-4437 - Steeda IRS Subframe Bushing Support System\u003cbr\u003e555-4123 - Steeda Rear Adjustable Camber Arms\u003cbr\u003e555-4121 - Steeda Billet Aluminum Vertical Links with Delrin Bushings\u003cbr\u003e555-4120 - Steeda Adjustable Rear Toe Links\u003cbr\u003e555-4117 - Steeda Rear Lower Control Arm Spherical Bearings\u003cbr\u003eM-5A460-M - Ford Performance Knuckle To Toe Link Bearing Assembly\u003c\/p\u003e \u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title \/ Default Title","offer_id":43875322331229,"sku":null,"price":2500.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/Steedaultamatedrag__38991.1706625781.jpg?v=1765078452"},{"product_id":"steeda-pro-active-shocks-and-struts-set-2015-2026-mustang-555-8423","title":"Steeda Pro Active Shocks and Struts Set (2015 - 2026 Mustang) 555-8423","description":"\u003ch2\u003eSteeda Pro Active Shocks and Struts Set (555-8423) – 2015-2026 Mustang\u003c\/h2\u003e\u003cp\u003eTransform the ride and handling of your S550 or S650 Mustang with Steeda’s \u003cstrong\u003ePro Active Shocks and Struts Set\u003c\/strong\u003e. Featuring patented frequency selective damping technology, this suspension upgrade is engineered specifically for the IRS chassis to deliver superior ride comfort, stability, and control under all driving conditions.\u003c\/p\u003e\u003cp\u003eUnlike traditional performance dampers that simply firm up the ride, the Pro Active system adapts to surface changes—maintaining tire contact and composure even on rough roads. During hard launches, the rebound characteristics reduce front-end rise for quicker 0–60 times, while advanced compression valving limits dive under heavy braking. The result is a confident, responsive, and predictable Mustang that shines on the highway, drag strip, or back roads.\u003c\/p\u003e\u003cp\u003eDeveloped in collaboration with an OE manufacturer and tested extensively on real-world roads, these shocks and struts are built to last. Their durable coating resists corrosion and damage from salt, gravel, and debris, ensuring long-term performance.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\u003cul\u003e\n\u003cli\u003ePatented Active valving for safer control on rough surfaces\u003c\/li\u003e\n\u003cli\u003eSuperior ride quality with improved comfort and stability\u003c\/li\u003e\n\u003cli\u003eOE-quality construction with Steeda-engineered tuning\u003c\/li\u003e\n\u003cli\u003eReduces front-end rise during launches and limits dive under braking\u003c\/li\u003e\n\u003cli\u003eBattle-tested under real-world highway and track conditions\u003c\/li\u003e\n\u003cli\u003eDurable finish resists corrosion and chipping\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Dampers should not be used with a spring lowering more than 1\" below stock ride height.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp style=\"padding-left: 30px;\"\u003e- 2015 Ford Mustang\u003cbr\u003e- 2016 Ford Mustang\u003cbr\u003e- 2017 Ford Mustang\u003cbr\u003e- 2018 Ford Mustang\u003cbr\u003e- 2020 Ford Mustang\u003cbr\u003e- 2021 Ford Mustang\u003cbr\u003e- 2022 Ford Mustang\u003cbr\u003e- 2023 Ford Mustang\u003cbr\u003e- 2024 Ford Mustang\u003cbr\u003e- 2025 Ford Mustang\u003cbr\u003e- 2026 Ford Mustang\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875322462301,"sku":"555-8423","price":939.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-8423-v2-1__81828__21652.1755720778.jpg?v=1765078455"},{"product_id":"steeda-road-race-front-k-member-2015-2026-mustang-gt-gt350-555-5061","title":"Steeda Road Race Front K-Member (2015 - 2026 Mustang GT \/ GT350) 555-5061","description":"\u003cp\u003eImprove weight distribution and handling with Steeda's Road Race K-Member. Track tested with proven results, the Steeda Road Race K-Member will help to cut down lap times and provide the driver with better feel of their Mustang.\u003c\/p\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eWeight Savings. Weight is the enemy of performance, and weight distribution is critical on performance cars. That's why Steeda has designed the Road Race K-Member to reduce weight and help with weight distribution so that you can corner better and have more control over your S550. \u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eAdds Rigidity. The Steeda Road-Race K-Member mounts at key points and has bracing to add strength to specific points. All factory mounting points have been utilized for improved strength and the tension and lateral link mounts have been boxed and gusseted.\u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eFactory Mounting Positions. The factory mounting positions are retained to allow for ease of use and to retain compatibility with OE components. The Road-Race K-Member is compatible with OEM steering and suspension and factory sway bar mounts. Factory engine mounts are retained as well but upgrading to Steeda Engine Mounts is recommended. \u003c\/div\u003e\u003cdiv\u003e \u003c\/div\u003e\u003cdiv\u003eBenefits:\u003c\/div\u003e\u003cdiv\u003e \u003cul\u003e \u003cli\u003e20% lighter than the factory K-member.\u003c\/li\u003e \u003cli\u003eDesigned for road race applications.\u003c\/li\u003e \u003cli\u003eBolt-in design does not require any modifications.\u003c\/li\u003e \u003cli\u003eRetains all factory mounting locations.\u003c\/li\u003e \u003cli\u003eAdjustable front track width.\u003c\/li\u003e \u003cli\u003eAdjustable front Roll center.\u003c\/li\u003e \u003cli\u003eBuilt-in, adjustable G-Trac Brace (for long tube headers).\u003c\/li\u003e \u003cli\u003eBuilt-in tie down hooks for easy use when trailering.\u003c\/li\u003e \u003cli\u003eMagneride sensor hookups to maintain Magneride.\u003c\/li\u003e \u003cli\u003eAdditional bracing in key area’s.\u003c\/li\u003e \u003cli\u003eUsed on our #20 car and Red ’18 HPDE car in testing.\u003c\/li\u003e \u003cli\u003eCompetition proven on our #20 car.\u003c\/li\u003e \u003c\/ul\u003eNotes:\u003c\/div\u003e\u003cdiv\u003e \u003cul\u003e \u003cli\u003eThis K-member is designed for off road competition use only and is not covered under any warranty stated or implied.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e\u003c!-- snippet location product_description --\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Yes","offer_id":43875322757213,"sku":"555-5061","price":2105.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/thumbnail__85490.1574960188.jpg?v=1765078471"},{"product_id":"steeda-front-sway-bar-1-38-2015-2026-mustang-555-1015","title":"Steeda Front Sway Bar 1-3\/8\" (2015 - 2026 Mustang) 555-1015","description":"\u003ch2\u003eSteeda Front Sway Bar 1-3\/8\" (2015 - 2026 Mustang) 555-1015\u003c\/h2\u003e\u003cp\u003eSteeda has the track-proven sway bars that will give you reduced body roll, adjustability, and the best handling of any sway bar out on the market. Our press-fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the sway bar ends makes for far greater strength for a bulletproof sway bar.\u003c\/p\u003e\u003cp\u003eDon't settle for sway bars that are not track-tested and made by companies who do not specialize in Mustangs. Steeda engineers, races, and wins with what it sells, order the best package for your daily-driven or track-driven 2015-2017 Mustang today!\u003c\/p\u003e\u003cp\u003eOur sway bars have machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on our multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese parts are less prone to cracking\/fatigue failure on the ends themselves.\u003c\/li\u003e\n\u003cli\u003eIt also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.\u003c\/li\u003e\n\u003cli\u003eWith less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOur bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875322822749,"sku":"555-1015","price":359.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-front-sway-bar-1-3-8-15-17-mustang-555-1015-3__72698.1556209855.gif?v=1765078477"},{"product_id":"steeda-adjustable-front-rear-sway-bar-kit-2015-2026-mustang-555-1017","title":"Steeda Adjustable Front \u0026 Rear Sway Bar Kit (2015 - 2026 Mustang) 555-1017","description":"\u003cp\u003eOur Steeda Mustang Front and Rear Sway Bar Kit for your 2015-2017 Mustang GT, EcoBoost, or V6 is our entry level kit for hardtop Mustang owners. This kit includes our adjustable Steeda front sway bar, and a Steeda rear sway bar that installs onto the factory rear sway bar end links. This kit will provide an increase in front and rear roll stiffness for a balanced handling package.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875322888285,"sku":"555-1017","price":593.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-front-rear-sway-bar-kit-15-17-mustang-555-1017-4__05529.1556209845.gif?v=1765078478"},{"product_id":"steeda-rear-sway-bar-2015-2026-mustang-555-1016","title":"Steeda Rear Sway Bar (2015 - 2026 Mustang) 555-1016","description":"\u003ch2\u003eSteeda Rear Sway Bar (2015 - 2026 Mustang) 555-1016\u003c\/h2\u003e\u003cp\u003eSteeda has the track-proven sway bars that will give you reduced body roll, adjustability, and the best handling of any sway bar out on the market. Our press-fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the sway bar ends makes for far greater strength for a bulletproof sway bar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDon't settle for sway bars that are not track-tested and made by companies who do not specialize in Mustangs. Steeda engineers, races, and wins with what it sells, order the best package for your daily-driven or track-driven 2015-2017 Mustang today!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eOur sway bars have machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on our multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese parts are less prone to cracking\/fatigue failure on the ends themselves.\u003c\/li\u003e\n\u003cli\u003eIt also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate.\u003c\/li\u003e\n\u003cli\u003eWith less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eOur bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875322953821,"sku":"555-1016","price":252.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-rear-sway-bar-15-17-mustang-555-1016-4__65451.1556209850_f0b81d75-0ca6-4c71-9c28-51ddac32b3ec.gif?v=1765078479"},{"product_id":"steeda-front-sway-bar-15-38mm-2015-2026-mustang-555-1038","title":"Steeda Front Sway Bar 1.5\" [38mm] (2015 - 2026 Mustang) 555-1038","description":"\u003ch2\u003eSteeda Front Sway Bar 1.5\" [38mm] (2015 - 2026 Mustang) 555-1038\u003c\/h2\u003e\u003cp\u003eStiffest Sway Bar on the market, massive One-and-a-half inch diameter (38mm)! Steeda has the track-proven sway bars that will give you reduced body roll, adjustability, and the best handling of any sway bar out on the market.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eOur press-fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the sway bar ends makes for far greater strength for a bulletproof sway bar.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eDon't settle for sway bars that are not track-tested and made by companies who do not specialize in Mustangs. Steeda engineers, races, and wins with what it sells; order the best package for your daily-driven or track-driven 2015-2017 Mustang today!\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875323019357,"sku":"555-1038","price":372.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-front-sway-bar-1-5-38mm-15-17-mustang-555-1038-3__18085.1556209813.gif?v=1765078486"},{"product_id":"steeda-adj-front-sway-bar-endlinks-2015-2026-mustang-555-1040","title":"Steeda Adj Front Sway Bar Endlinks (2015 - 2026 Mustang) 555-1040","description":"\u003cp\u003eSteeda's adjustable stay-bar endlinks make a great upgrade for the stock endlinks as well as the perfect dual purpose street\/open track piece. For street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875323084893,"sku":"555-1040","price":194.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-adj-front-sway-bar-endlinks-15-17-mustang-555-1040-3__11161.1556209808.gif?v=1765078487"},{"product_id":"steeda-adj-rear-sway-bar-endlinks-2015-2026-mustang-555-1041","title":"Steeda Adj Rear Sway Bar Endlinks (2015 - 2026 Mustang) 555-1041","description":"\u003ch2\u003eSteeda Adj Rear Sway Bar Endlinks (2015 - 2026 Mustang) 555-1041\u003c\/h2\u003e\u003cp\u003eSteeda's adjustable swaybar end links make a great upgrade for the stock end links as well as the perfect dual purpose street\/open track piece.\u003c\/p\u003e\u003cp\u003eFor street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units. For competition use our double adjustable design makes it adjustable on the car and allows to both retain proper swaybar geometry on lowered cars and adjust swaybar preload for suspension fine tuning.\u003c\/p\u003e\u003cp\u003eThe adjustment body is constructed from lightweight aerospace grade aluminum and is corrosion resistant. End links feature case hardened ball studs that feature significantly increased swing area compared to spherical rod ends. Includes locking hardware for installation.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875323150429,"sku":"555-1041","price":184.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-adj-rear-sway-bar-endlinks-15-17-mustang-555-1041-4__46456.1556209803.jpg?v=1765078494"},{"product_id":"steeda-sway-bar-endlinks-adjustable-2015-2026-mustang-555-1042","title":"Steeda Sway Bar Endlinks Adjustable (2015 - 2026 Mustang) 555-1042","description":"\u003cdiv class=\"product_desc\"\u003eSteeda's S550 Mustang adjustable stay-bar endlinks make a great upgrade for the stock endlinks as well as the perfect dual purpose street\/open track piece. For street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units.\u003c\/div\u003e \u003cdiv class=\"product_desc\"\u003e \u003c\/div\u003e \u003cdiv class=\"product_desc\"\u003eDirect fit for Ford 2015-2020 Mustang S550\u003c\/div\u003e \u003cdiv class=\"product_desc\"\u003e \u003c\/div\u003e \u003cdiv class=\"product_desc\"\u003e\n\u003cstrong\u003eProduct Features:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003eNo added NVH\u003c\/li\u003e \u003cli\u003eAdjustable for better handling\u003c\/li\u003e \u003cli\u003eStronger than OEM endlinks\u003c\/li\u003e \u003cli\u003eConnects Sway bars to the Suspension\u003c\/li\u003e \u003cli\u003eGreat for autocross, canyon carving or track day use\u003c\/li\u003e \u003cli\u003eUses aerospace aluminum \u003c\/li\u003e \u003cli\u003eCompatible with factory or aftermarket bars using factory endlinks\u003c\/li\u003e \u003cli\u003ePreserves factory angles when using lowering springs\u003c\/li\u003e \u003cli\u003eCreates side to side balance and controls sway bar preload\u003c\/li\u003e \u003cli\u003eLifetime warranty\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e \u003c\/div\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875323215965,"sku":"555-1042","price":356.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-sway-bar-endlinks-adj-15-17-mustang-555-1042-4__57409.1556209798.gif?v=1765078497"},{"product_id":"steeda-stage-2-handling-package-2015-2026-mustang-gt-ecoboost-555-2124","title":"Steeda Stage 2 Handling Package (2015 - 2026 Mustang GT \/ EcoBoost) 555-2124","description":"\u003cb\u003eKit Includes:\u003c\/b\u003e\u003cbr\u003e • 555-5731 - Strut Tower Brace\u003cbr\u003e • 555-5532 - Extreme G-Trac K-Member Brace\u003cbr\u003e • 555-4437 - IRS Subframe Bushing Support System\u003cbr\u003e • 555-4438 - IRS Subframe Alignment Kit\u003cbr\u003e \u003cbr\u003e Give your 2015-2017 Mustang the proven performance of Steeda manufactured suspension parts. This Steeda Stage 2 Handling Package for your 2015-2016 Mustang GT\/EcoBoost is designed to stiffen the front chassis, stiffen the front subframe, and increase traction.\u003cbr\u003e \u003cbr\u003e Steeda Stage 2 Handling Package for your 2015-2017 Mustang GT\/EcoBoost begins to stiffen the chassis of your S550. A stiffer more confident chassis starts with our Steeda Strut Tower Brace. Our Steeda G-Trac Brace helps stiffen connecting points between control arm mounts and the rear subframe making your load path more direct.\u003cbr\u003e \u003cbr\u003e Along with chassis stiffening, our Steeda Stage 2 Handling Package begins to address wheel hop issues notorious with the new 2015-2017 Mustang. The Steeda IRS Subframe Bushing Support System helps with rear subframe deflection that is a direct cause of wheel hop. This bushings stiffen the rear subframe allowing the car to increase traction to the rear wheels. In conjunction with the bushing we give your our IRS Subframe Alignment Kit, which insures your subframe is directly aligned to your chassis, and insures straight launches off the line.\u003cbr\u003e \u003cbr\u003e \u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003cbr\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875323543645,"sku":"555-2124","price":734.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-stage-2-handling-package-15-17-mustang-gt-ecoboost-555-2124-4__30112.1556209328.jpg?v=1765078587"},{"product_id":"steeda-ultimate-irs-stop-the-hop-street-kit-2015-2026-mustang-555-2129","title":"Steeda Ultimate IRS Stop the Hop Street Kit (2015 - 2026 Mustang) 555-2129","description":"Give your 2015+ Mustang the proven performance of Steeda manufactured suspension parts. This Steeda Mustang Ultimate IRS 'Stop the Hop' Package for your 2015+ Mustang GT, EcoBoost, or V6 is designed to provide increased traction, stiffen the IRS subframe, reduce wheel hop, and improve overall handling characteristics.\u003cp\u003eReduces wheel hop\u003c\/p\u003e Our IRS 'Stop the Hop' Package addresses wheel hop issues notorious with the new 2015 Mustang. The Steeda IRS Subframe Bushing Support System helps with rear subframe deflection which is a direct cause of wheel hop. These bushing supports stiffen the rear subframe allowing the car to increase traction to the rear wheels. In conjunction with the bushing we also include our IRS Subframe Alignment Kit, which ensures your subframe is directly aligned to your chassis, and results in straight launches off the line.\u003cp\u003eNo added NVH\u003c\/p\u003e Our Steeda Vertical Links are far superior to the stock vertical links on your S550 Mustang. They feature billet steel bushing sleeves and spacers, providing less deflection than the rubber bushings in the stock links, without increasing NVH. The strength of the billet that the Steeda Vertical Links are made of will provide a more solid feel to your suspension and will not flex under load.\u003cp\u003eLimits IRS sub frame movement\u003c\/p\u003e Our Steeda Mustang IRS Subframe Support Braces tie this Steeda Stage 3 Handling package together. These quality 4120 chrome moly steel braces are engineered to connect 3 very important points on the S550 chassis. The result of this solid connection is added rigidity that lacks in the rear of the 2015+ Mustang. By stiffening the connections of the rear of the chassis, this one component is able to limit IRS subframe movement, reduce wheel hop, and improve handling during cornering.\u003cp\u003eImproves vehicle handling\u003c\/p\u003e Our Steeda Adjustable Rear Toe Links improve the handling characteristics and improve your vehicle's overall handling response. These toe links have a large range of adjustability and adjustments can be made while they're installed on the car.\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e555-4437 - 2015 Steeda Mustang IRS Subframe Bushing Support System\u003c\/li\u003e\n\u003cli\u003e555-4438 - 2015 Steeda Mustang IRS Subframe Alignment Kit\u003c\/li\u003e\n\u003cli\u003e555-4121 - 2015 Steeda Mustang Billet Aluminum Vertical Links\u003c\/li\u003e\n\u003cli\u003e555-5754 - 2015 Steeda Mustang IRS Subframe Support Braces\u003c\/li\u003e\n\u003cli\u003e555-4120 - 2015 Steeda Mustang Adjustable Rear Toe Links\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eImproves vehicle handling\u003c\/li\u003e\n\u003cli\u003eOn-car toe adjustability\u003c\/li\u003e\n\u003cli\u003eImproves suspension compliance\u003c\/li\u003e\n\u003cli\u003eIncreases traction\u003c\/li\u003e\n\u003cli\u003eAligns subframe to chassis\u003c\/li\u003e\n\u003cli\u003eLimits IRS sub frame movement\u003c\/li\u003e\n\u003cli\u003eReduces wheel hop\u003c\/li\u003e\n\u003cli\u003eNo added NVH\u003c\/li\u003e\n\u003cli\u003eFits 2024+ non-Brembo Pack Mustangs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e Steeda IRS Subframe Support Braces Will Not Fit Convertible. Will not fit 2024+ Mustang equipped with Brembo brakes.\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title \/ Default Title","offer_id":43875323576413,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-ultimate-irs-stop-the-hop-package-15-17-mustang-555-2129-4__60784.1741360116.gif?v=1765078594"},{"product_id":"steeda-stage-3-handling-package-2015-2026-mustang-555-2136","title":"Steeda Stage 3 Handling Package (2015 - 2026 Mustang) 555-2136","description":"\u003cb\u003eKit Includes:\u003c\/b\u003e\u003cbr\u003e \u003cp\u003e\u0026amp;#8226 555-4120 Adjustable Rear Toe Links\u003c\/p\u003e \u003cp\u003e\u0026amp;#8226 555-4121 Billet Aluminum Vertical Links\u003c\/p\u003e \u003cp\u003e\u0026amp;#8226 555-5754 IRS Subframe Support Braces\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eGive your 2015-2017 Mustang the proven performance of Steeda manufactured suspension parts. This Steeda Stage 3 Handling Package for your 2015-2017 Mustang GT, EcoBoost, or V6 is designed to provide better handling characteristics, increase traction, and reduce wheel hop.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eSteeda Steeda Stage 3 Handling Package for your 2015-2017 Mustang GT, EcoBoost, or V6 includes Steeda Adjustable Rear Toe Links to improve the handling characteristics and improve vehicle's overall handling response. These toe links have a large range of adjustability and can be done with uninstalling them.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eOur Steeda Vertical Links are far superior to the stock vertical links on your S550 Mustang. They feature billet steel bushing sleeves and spacers, providing less deflection than the rubber bushings in the stock links without increasing NVH. The strength of the billet that the Steeda Vertical Links are made of will provide a more solid feel to your suspension and will not flex under load.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eOur Steeda Mustang IRS Subframe Support Braces tie this Steeda Stage 3 Handling package together. These quality 4120 chrome moly steel braces are engineered to connect 3 very important points on the S550 chassis. The result of this solid connection is added rigidity that lacks in the rear of the 2015-2017 Mustang. By stiffening the connections of the rear of the chassis, this one component is able to limit IRS subframe movement, reduce wheel hop, and improve handling during cornering.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875323641949,"sku":"555-2136","price":982.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-stage-3-handling-package-15-17-mustang-555-2136-4__09085.1556209310.gif?v=1765078597"},{"product_id":"steeda-sport-suspension-package-2015-2026-mustang-555-2407","title":"Steeda Sport Suspension Package (2015 - 2026 Mustang) 555-2407","description":"\u003cul\u003e\n\u003cli\u003e555-8150 - Non-Adjustable Pro-Action Shocks \u0026amp; Struts\u003c\/li\u003e\n\u003cli\u003e555-8210 - Lowering 1.125\" Front and 1\" Rear Progressive Sport Springs\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eAdd style and function to your ride with Steeda's Comfort Ride Package on your S550 Mustang GT or V6! Pairing our Non-Adjustable Pro-Action Shocks and Struts with Progressive Sport Springs, Steeda has put together a sensible and affordable package to get both a lower stance and a better ride quality. This kit will provide a sharper steering response, improved vehicle handling and stability, noticeable reduction in nosedive all while maintaining an extremely comfortable ride quality!\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eOnce the aftermarket shocks started coming out for the S550 Mustang, people all across the country ran into issues breaking the factory rear shock mount. Whether it was drag racing or road racing with very stiff shocks, customers were having all sorts of issues. Pair this suspension package with our Steeda Billet Rear Shock Mounts which are much stronger than the factory mounts.\u003c\/li\u003e\n\u003cbr\u003e\u003cli\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875323871325,"sku":"555-2407","price":1075.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-comfort-suspension-package-15-17-mustang-gt-v6-555-2407-4__76221.1556209207.gif?v=1765078606"},{"product_id":"steeda-heavy-duty-motor-mounts-adj-2015-2026-mustang-gt-gt350-555-4039","title":"Steeda Heavy Duty Motor Mounts Adj (2015 - 2026 Mustang GT \/ GT350) 555-4039","description":"\u003cdiv class=\"product_desc\"\u003eSteeda Adjustable Motor Mounts for your 2015-2024 S550 Mustang GT or GT350 directly replace the weak factory hydra bushing engine mounts. While the factory mounts get the damping job done, they can be prone to fatigue and sagging even with only limited hard use.\u003cbr\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eIn addition to being much more durable than the factory engine mounts, these Steeda Adjustable Motor Mounts for the 2015-2017 S550 Mustang GT and GT350 are adjustable from factory height up to 3\/4 of an inch lower to create clearance for superchargers and strut tower braces.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003eSteeda Adjustable Motor Mounts for the 2015-2024 S550 Mustang GT and GT350 also feature dual durometer bushing packages. Choose the softer red bushings for great control with only minimal increase in engine vibration transmission. Choose the hard black bushings for maximum control, but will increase engine vibration transmission significantly. Black bushings package is highly recommended for competition use only.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e \u003c\/div\u003e \u003c!-- snippet location product_description --\u003e \u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875324133469,"sku":"555-4039","price":248.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-heavy-duty-motor-mounts-adj-15-17-mustang-gt-gt350-555-4039-4__01249.1556208653.gif?v=1765078619"},{"product_id":"steeda-rear-toe-links-adj-2015-2026-mustang-555-4120","title":"Steeda Rear Toe Links Adj (2015 - 2026 Mustang) 555-4120","description":"\u003cp\u003eThese Steeda S550 Mustang Adjustable Rear Toe Links for 2015-2017 Mustang GT, EcoBoost, and V6 will improve the handling characteristics and improve the vehicle's overall handling response, making the car feel more connected and balanced - therefore making it easier to control.\u003c\/p\u003e\u003cp\u003eWhether you daily drive your Mustang in a spirited fashion or you are an auto-cross or road course enthusiast, these Steeda S550 Mustang Adjustable Rear Toe Links for the 2015-2016 Mustang GT, EcoBoost, and V6 are a must-have. Our Steeda Rear Toe Links feature over 1-inch of adjustment, making them perfect for street or race use, giving you precise toe alignment for your driving objective.\u003c\/p\u003e\u003cp\u003eOur Steeda Adjustable Rear Toe Links are TIG-welded and powdercoated for long-lasting protection and designed to allow for adjustments to be made with the part installed on the car - you do not have to remove this part for toe adjustment!\u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875324264541,"sku":"555-4120","price":388.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-rear-toe-links-adj-15-17-mustang-555-4120-4__02512.1556208560.gif?v=1765078626"},{"product_id":"steeda-vertical-links-delrin-bush-2015-2026-mustang-555-4121","title":"Steeda Vertical Links Delrin Bush (2015 - 2026 Mustang) 555-4121","description":"\u003cp\u003eThese Steeda S550\/S650 Mustang Billet Aluminum Vertical Links for 2015+ Mustang GT, EcoBoost, and V6 are made from 6061, aircraft grade aluminum. They feature CNC machined Delrin bushings, and billet steel bushing sleeves and spacers, providing less deflection than the rubber bushings in the stock vertical links, yet does not add any NVH.\u003c\/p\u003e\u003cp\u003eThese Steeda Mustang Billet Aluminum Vertical Links for 2015+ Mustang GT, EcoBoost, and V6 will not flex under load like the stock links, and will give a better feel of the rear suspension, which helps the rest of the suspension assembly perform as it should.\u003c\/p\u003e\u003cp\u003eOur one-piece billet design is accurate down to one-thousandth of an inch (0.001\"). The S550\/S650 Mustang geometry requires a precise length Vertical Link (something not possible with a welded design), as either a longer or shorter piece will drastically degrade handling and stability.\u003c\/p\u003e\u003cp\u003eThe Install for Steeda's Mustang Billet Aluminum Vertical Links for 2015+ Mustang GT, EcoBoost, and V6 is simple, and includes all necessary hardware.\u003c\/p\u003e\u003cspan\u003eSteeda Vertical Link Application recommendations:\u003c\/span\u003e\u003cul\u003e\n\u003cli\u003eDelrin (555 4121) : Recommended for Drag Racing \u0026amp; to eliminate wheel hop\u003c\/li\u003e\n\u003cli\u003ePolyurethane \u003ca href=\"https:\/\/www.beefcakeracing.com\/steeda-555-4129\/\"\u003e(555 4129)\u003c\/a\u003e : Recommended for handling applications (Street, Road Racing, AutoX)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eProduct Benefits\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReduces wheel hop\u003c\/li\u003e\n\u003cli\u003eInstalls easily, with basic hand tools\u003c\/li\u003e\n\u003cli\u003eWill not flex under load\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003eMade in the United States with high grade materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e- \u003c\/strong\u003e2015 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2016 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2017 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2018 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2019 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2020 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2021 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2022 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2023 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2024 Ford Mustang NON BREMBO\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eNote:\u003c\/span\u003e Fits Non-Brembo Package (single piston rear caliper) 2024+ Mustang's. If you have a Performance Pack or Brembo Package 2024+ Mustang, please see part \u003ca href=\"https:\/\/www.beefcakeracing.com\/steeda-555-4130\/\"\u003e555-4130\u003c\/a\u003e.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875324330077,"sku":"555-4121","price":349.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-vertical-links-delrin-bush-15-18-mustang-555-4121-4__88271.1723168663.gif?v=1765078633"},{"product_id":"steeda-rear-adjustable-camber-arms-2015-2026-mustang-555-4123","title":"Steeda Rear Adjustable Camber Arms (2015 - 2026 Mustang) 555-4123","description":"\u003ch2\u003eSteeda Rear Adjustable Camber Arms (2015 - 2026 Mustang) 555-4123\u003c\/h2\u003e\u003cp\u003eIf you've lowered your Mustang GT, EcoBoost, or V6 and are looking to dial in precise suspension settings for track day or daily spirited driving, look no further! Our Steeda engineers have been hard at work perfecting our S550 Mustang Rear Adjustable Camber Arms to improve even further on the factory IRS suspension components. The factory stock camber arm is made to withstand lots of force, but Steeda has found a way to improve the factory camber arm even more.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures \u0026amp; Benefits:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCamber adjustment from -5 degrees to positive 2 degrees\u003c\/li\u003e\n\u003cli\u003eIncreased cornering performance, more predictable handling\u003c\/li\u003e\n\u003cli\u003eGain rear grip\u003c\/li\u003e\n\u003cli\u003eIncrease vehicle reaction time\u003c\/li\u003e\n\u003cli\u003eOn-car adjustability\u003c\/li\u003e\n\u003cli\u003eNo increase in NVH\u003c\/li\u003e\n\u003cli\u003ePrevent uneven tire wear on lowered cars\u003c\/li\u003e\n\u003cli\u003eEasy 45 minute install\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe bushings on the stock camber arms are soft, and just like any soft bushing there is deflection experienced under hard cornering. Bushing deflection causes your wheel and tire to lean outward, letting the tires lose camber while cornering. The loss of camber results in a reduction in grip and makes your powerful Mustang's handling less predictable. Make the most of the money you put into your alignment and tires by maintaining proper camber no matter where you are driving, with our Steeda Rear Adjustable Camber Arms.\u003c\/p\u003e\u003cp\u003eThe factory suspension comes with many bushings which also bind and hinder the suspension from articulating. Our Steeda rear camber arms get rid of two of these bushings, eliminating their artificial spring rate and ensuring that your suspension has the lowest amount of friction possible. Let your suspension articulate the way it should with our Steeda Camber Arms.\u003c\/p\u003e\u003cp\u003eOur engineers have gone above and beyond with design, development, simulations, and testing to provide our customers with the highest-quality adjustable camber arms on the market. Our Steeda S550 Mustang Rear Adjustable Camber Arms can be adjusted from +2 degrees camber all the way to -5 degrees camber, more than enough adjustability for any street or race set up. Due to its natural bend design, our Steeda camber arms were brutally strength-tested because of the amount of load this particular suspension component takes on a daily basis.\u003c\/p\u003e\u003cp\u003eOur camber arms completely replace the soft factory bushings with nylon-coated spherical bearings which prevent dirt from penetrating the bearings and ensuring the rod ends will never need to be replaced. The Delrin on one side and spherical bearing on the other side completely rids the deflection of the factory bushings - reducing deflection allows you to maintain proper camber during hard cornering without increasing NVH at all. Maintaining proper camber during cornering allows you to prevent the loss of grip and allows for a more responsive and predictable handling car. This leaves the handling feeling more direct and positive while also making the car much more capable on the track. Stop throwing away money by replacing your unevenly worn tires due to improper rear camber - replace your stock camber arms with Steeda and never look back.\u003c\/p\u003e\u003cp\u003eOur Adjustable Rear Camber Arms are manufactured from Aerospace grade 6061 aluminum for incredible strength. Spherical nylon-lined bearings are made with specific preloads imparted on the bearing, ensuring lowest amount of bind on the ball bearing as possible. One of the best features of our camber arm is the adjustability we give you without having to take the part off the car. To adjust your rear camber setting all you need to do is jack up your car, turn the middle nut and you're good to go.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Yes","offer_id":43875324461149,"sku":"555-4123","price":734.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-rear-adj-camber-arms-15-17-mustang-555-4123-4__99694.1611918845.gif?v=1765078639"},{"product_id":"steeda-front-adj-camber-bolts-2015-2026-mustang-555-4124","title":"Steeda Front Adj Camber Bolts (2015 - 2026 Mustang) 555-4124","description":"\u003cp\u003eThese adjustable camber bolts fit the front struts of the S550 2015+ Mustang. They are designed to provide more camber adjustment than factory. A must for lowered cars to get the camber back to factory specs, or great for autocrossing when more camber is desired.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Yes","offer_id":43875324428381,"sku":"555-4124","price":51.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-front-adj-camber-bolts-15-17-mustang-555-4124-4__63074.1556208544.gif?v=1765078639"},{"product_id":"steeda-rear-camber-adjustment-kit-2015-2026-mustang-555-4126","title":"Steeda Rear Camber Adjustment Kit (2015 - 2026 Mustang) 555-4126","description":"\u003cp\u003eLooking for a simple and cost effective way to gain some much needed camber adjustment on your lowered 2015-2018 Mustang? Look no further than Steeda’s Rear Camber Adjustment Bracket. While the factory gives you some room to work with, it is still very limited on a lowered car. Our Rear Camber Adjustment Kit bolts into the factory camber adjustment location increasing the +\/- 2 degrees over the factory setup. Our kit works with stock, Steeda Non-Adjustable, and Steeda Adjustable Camber Arms to fit your needs. Simple installation, reliable parts, and quality work is the Steeda way.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875324526685,"sku":"555-4126","price":174.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-ream-camber-adjustment-kit-15-17-mustang-555-4126-4__41218.1556208540.gif?v=1765078641"},{"product_id":"steeda-aluminum-vertical-links-w-polyurethane-bushings-2015-2026-mustang-555-4129","title":"Steeda Aluminum Vertical Links w\/ Polyurethane Bushings (2015 - 2026 Mustang) 555-4129","description":"\u003cp\u003eFeaturing our polyurethane bushings, Steeda's S550\/S650 Mustang Billet Aluminum Vertical Links provide less deflection than the rubber bushings in the stock vertical links, but do not add any NVH.\u003cbr\u003e\u003cbr\u003eMade from 6061 aircraft grade aluminum, these links will keep your S550\/S650 wheel alignment dialed-in and help keep the power planted to the ground. The larger polyurethane bushings, combined with billet steel sleeves and spacers, offer more control through jounce and rebound while still offering plenty of compliance, causing absolutely no suspension bind or an artificial spring rate.\u003c\/p\u003e\u003cp\u003eOur one-piece billet design is accurate down to one-thousandth of an inch (0.001\"). The S550\/S650 Mustang geometry requires a precise length Vertical Link (something not possible with a welded design), as a either a longer or shorter piece will drastically degrade handling and stability.\u003c\/p\u003e\u003cp\u003eThese Vertical Links are an excellent component for road racers, giving better stability under severe and high speed hard braking.\u003cbr\u003e\u003cbr\u003eMade in the USA and backed by a limited lifetime warranty, to give your Mustang the best parts possible go with Steeda, where Speed Matters\u003c\/p\u003e\u003cspan\u003eSteeda Vertical Link Application recommendations:\u003c\/span\u003e \u003cul\u003e \u003cli\u003eDelrin \u003ca href=\"https:\/\/www.beefcakeracing.com\/steeda-555-4121\"\u003e555 4121\u003c\/a\u003e : Recommended for Drag Racing \u0026amp; to eliminate wheel hop\u003c\/li\u003e \u003cli\u003ePolyurethane (555 4129) : Recommended for handling applications (Street, Road Racing, AutoX)\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eProduct Benefits:\u003c\/span\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eReduces wheel hop\u003c\/li\u003e \u003cli\u003eProvides better handling characteristics\u003c\/li\u003e \u003cli\u003eWill not flex under load\u003c\/li\u003e \u003cli\u003eNo increase in NVH\u003c\/li\u003e \u003cli\u003eOne piece billet construction for maximum strength, unlike competitor products with welded ends where cracking can occur over time due to stress risers\u003c\/li\u003e \u003cli\u003eMade in the USA\u003c\/li\u003e \u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 2015 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2016 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2017 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2018 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2019 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2020 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2021 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2022 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2023 Ford Mustang\u003c\/p\u003e\u003cp\u003e- 2024 Ford Mustang NON BREMBO\u003c\/p\u003e\u003cp\u003eNote: Fits Non-Brembo Package (single piston rear caliper) 2024+ Mustang's. If you have a Performance Pack or Brembo Package 2024+ Mustang, please see part \u003ca href=\"https:\/\/www.beefcakeracing.com\/steeda-555-4130\"\u003e555-4130\u003c\/a\u003e.\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875324592221,"sku":"555-4129","price":281.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/555-4129b__36194__49308.1723168586.jpg?v=1765078647"},{"product_id":"steeda-irs-subframe-alignment-kit-2015-2026-mustang-555-4438","title":"Steeda IRS Subframe Alignment Kit (2015 - 2026 Mustang) 555-4438","description":"\u003cp\u003eThe Steeda S550 Mustang IRS Subframe Alignment Kit is made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other, preventing corrosion. Delrin is also less weight then aluminum or steel inserts and therefore keeping performance in mind. The Delrin sleeves slide into the subframe mounting holes, and fill the extra space left between the subframe mount and bolt from the factory.\u003c\/p\u003e\u003cp\u003eOur Steeda S550 Mustang IRS Subframe Alignment Kit guarantees that the subframe will be bolted to the same location every time it is lowered. Eliminating the need for unnecessary alignments.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875324657757,"sku":"555-4438","price":69.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-irs-subframe-alignment-kit-15-17-mustang-555-4438-4__36833.1556208452.gif?v=1765078651"},{"product_id":"steeda-adjustable-differential-bushing-insert-system-2015-2026-mustang-555-4443","title":"Steeda Adjustable Differential Bushing Insert System (2015 - 2026 Mustang) 555-4443","description":"\u003cp\u003eMinimize pinion angle changes, increase traction, eliminate wheel hop and differential deflection with Steeda's new kit. Made from high-strength urethane to Steeda's exact specifications and durometers, our kit comes with 2 different bushing options - our red 'street' 80 durometer bushings and our black 'performance' 90 durometer bushings. Both bushing options will increase performance with no increase in NVH, a Steeda-exclusive.\u003cbr\u003e\n\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSteeda's kit adds the strength and support the OEM bushings need to perform the way our customers intended. Once again, this is not a permanent modification - there is no drilling, cutting or pressing required. Simply loosen and remove a couple bolts and this kit installs in less than 1 hour. Bushings are included for both the front and rear differential mounting locations. Grade 10.9 hardware is included with zinc-plated washers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For hardcore enthusiasts that want ZERO pinion deflection, try our 555 4440 kit. This kit features aluminum bushing inserts. For race-use only as it will increase NVH and gear noise.  \u003cstrong\u003eThis product may increase noise, vibration, and harshness (NVH) after installation. NVH may increase slightly with red\/street bushing inserts, but more aggressively with black\/performance bushing inserts. This product itself does not generate any additional NVH, rather it transmits existing rear differential noise into the cabin by firming up the OE bushings.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Red","offer_id":43875324723293,"sku":"555-4443-1","price":194.39,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43875324756061,"sku":"555-4443-2","price":194.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-adj-differential-bushing-insert-system-15-17-mustang-ecoboost-555-4443-4__62457.1556208434.gif?v=1765078724"},{"product_id":"steeda-adjustable-bumpstop-kit-2015-2026-mustang-555-4445","title":"Steeda Adjustable Bumpstop Kit (2015 - 2026 Mustang) 555-4445","description":"\u003cp\u003eOnce again Steeda has paved the way for you to take your S550 Mustang to the next level with the Adjustable Bumpstop Kit. Designed and engineered in-house specifically for the S550 Mustang, these bumpstops are made from high-impact polyurethanewhich make them stiffer than factory and prevent damage to the shocks, and other suspension components. The adjustable feature gives the customer the ability to use the kit on a stock or lowered ride height vehicle. This means notrimming of the factory bumpstops in order to maintain a safe and quality ride on lowered vehicles.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eWorks with all stock shocks and struts EXCEPT GT350 MagnaRide (NOTE: The shocks on the Performance Pack (PP) models has a smaller diameter shaft. Our bumpstops will work, but they will not fit as tight.) Retains stock boots. For Steeda Springs 555-8208, 555-8209. 555-8210, and 555-8212 : Both are to be used at FULL height. For Steeda Springs 555-8214,555-8222, 555-8211, and 555-8213 : Both are to be used at SHORT height. Fits ALL Steeda and Koni shocks and struts. Vogtland, KW, and Roush Front will work, rears are under testing.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875324821597,"sku":"555-4445","price":64.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-adj-bumpstop-kit-15-17-mustang-555-4445-3__44516.1556208424_98f69687-c7c1-4db6-8f47-a96e90f26f4b.gif?v=1765078730"},{"product_id":"steeda-subframe-alignment-support-kit-2015-2026-mustang-555-4450","title":"Steeda Subframe Alignment \u0026 Support Kit (2015 - 2026 Mustang) 555-4450","description":"\u003cp\u003eThese Steeda S550 Mustang IRS Subframe Bushing Support System for your 2015-2017 Mustang GT, EcoBoost, and V6 gives the rear end a much more solid feel with no increase in NVH at all. The Steeda IRS Subframe bushings eliminate rear subframe movement notorious in the 2015-2017 Mustang GT, EcoBoost, and V6. A stiffened subframe allows the car to increase traction to the rear wheels and is the first step towards eliminating wheel hop. The Steeda S550 Mustang IRS Subframe Bushing Support System for your 2015-2017 Mustang GT, EcoBoost, and V6 are easy to install, with basic hand tools. The Steeda IRS bushing kit also does not require any permanent modifications to the car.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, \u003c\/em\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875325018205,"sku":"555-4450","price":307.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-subframe-alignment-support-kit-15-17-mustang-555-4450-3__80691.1556208405.gif?v=1765078746"},{"product_id":"steeda-stop-the-hop-street-starter-kit-2015-2026-mustang-555-4455","title":"Steeda Stop the Hop Street Starter Kit (2015 - 2026 Mustang) 555-4455","description":"\u003cp\u003eThe Steeda Stop the Hop Kit gives the S650 \/ S550 Mustang owner the fundamental foundation for ultimate traction and compliance. The complete starter kit provides the basic IRS upgrades to improve traction and stop wheel hop . The factory S550 Mustang IRS subframe, (often inaccurately referred to as a cradle), mounts to the S550 chassis with 4 mounting locations utilizing 4 soft rubber bushings with plenty of voids, even in the bolt holes. The kit we put together addresses these issues and more. We use the STEEDA Stop the Hop kits on all our 5.0L Mustang builds at ByePolr Performance.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e- 555-5754 - IRS Subframe Support Braces\u003c\/p\u003e\u003cp\u003e- 555-4437 - IRS Subframe Bushing Support System\u003c\/p\u003e\u003cp\u003e- 555-4438 - IRS Subframe Alignment Kit\u003c\/p\u003e\u003cp\u003eFirst is our Alignment dowel kit. This fills the factory bolt hole voids with CNC machined delrin inserts that will square up the rear subframe to the chassis. By filling these voids we are also limiting the side to side and front to back movement of the subframe that is present under hard acceleration and braking.\u003c\/p\u003e\u003cp\u003eSecond is our tried and true IRS Subframe Bushing Support System. This 8 piece kit was a first of it's kind in the performance aftermarket and so innovative and popular we patented it's design! Made in house from billet 6061 aluminum and featuring stainless steel hardware, this kit fills all the factory voids in the IRS subframe mounting locations. It's job is to prevent up and down movements of the subframe.\u003c\/p\u003e\u003cp\u003eThe 3rd and final piece to this kit is the strongest support brace for the S550 IRS on the market!! Made in house from chrome moly steel, this brace is designed to support the factory subframe by directly tying it into the chassis at key mounting locations. Using factory mounting locations on the factory frame, this 5 point brace supports the front factory mount and the lower control arm mount as well. A simple bolt in design this brace ties the subframe to the chassis in the best possible way.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eByePolr Performance is an Authorized Dealer for Steeda, call 1-855-827-7223, 9am-10pm EST\u003c\/em\u003e\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title \/ Default Title","offer_id":43875325050973,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-stop-the-hop-starter-kit-15-17-mustang-555-4455-4__70437.1743672646.gif?v=1765078753"},{"product_id":"steeda-stage-1-drag-pack-2015-2026-mustang-gt-v6-ecoboost-555-4457","title":"Steeda Stage 1 Drag Pack (2015 - 2026 Mustang GT \/ V6 \/ EcoBoost) 555-4457","description":"\u003ch2\u003eSteeda Stage 1 Drag Pack (555-4457) - 2015–2026 Mustang GT\/V6\/EcoBoost\u003c\/h2\u003e\u003cp\u003eTake your Mustang from the street to the strip with the \u003cstrong\u003eSteeda Stage 1 Drag Pack\u003c\/strong\u003e—a proven suspension package designed to deliver maximum traction, quicker launches, and reduced wheel hop. Featured on Steeda’s own world-record-setting 2018 Mustang GT, this kit has the pedigree and performance you need to shave time off your ETs while maintaining excellent street manners.\u003c\/p\u003e\u003cp\u003eThe Stage 1 Drag Pack combines three of Steeda’s most effective drag racing upgrades: \u003cem\u003eDrag Springs (555-8231), Pro-Action Adjustable Rear Shocks (555-8156), and the Stop the Hop Enthusiast Kit (555-4456)\u003c\/em\u003e. Together, these components create the ultimate foundation for consistent, powerful launches without unwanted chassis movement.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eWhat’s Inside the Kit\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrag Springs (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-8231\/\"\u003e555-8231\u003c\/a\u003e)\u003c\/strong\u003e – Optimized for rear traction when paired with coilovers up front. Helps plant your Mustang for harder, straighter launches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-Action Adjustable Rear Shocks (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-8156\/\"\u003e555-8156\u003c\/a\u003e)\u003c\/strong\u003e – Engineered with Steeda’s proprietary valving, offering adjustable rebound damping at the twist of a knob for perfect street-to-strip versatility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStop the Hop Enthusiast Kit (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-4456\/\"\u003e555-4456\u003c\/a\u003e)\u003c\/strong\u003e – Tackles IRS movement with four key components: \u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eIRS Subframe Alignment Kit (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-4438\/\"\u003e555-4438\u003c\/a\u003e)\u003c\/em\u003e – CNC-machined Delrin inserts to square up the rear subframe and limit chassis movement under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eIRS Subframe Bushing Support System (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-4437\/\"\u003e555-4437\u003c\/a\u003e)\u003c\/em\u003e – Patented billet aluminum inserts filling factory voids to stop up-and-down subframe movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eChrome-Moly IRS Support Brace (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-5754\/\"\u003e555-5754\u003c\/a\u003e)\u003c\/em\u003e – A 5-point bolt-in brace tying the subframe directly into the chassis for maximum strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRear Lower Control Arm Spherical Bearings (\u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-4117\/\"\u003e555-4117\u003c\/a\u003e)\u003c\/em\u003e – Eliminates deflection, improves responsiveness, and ensures tires hook immediately under power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProven on Steeda’s 10-second Mustang GT\u003c\/li\u003e\n\u003cli\u003eIncreased traction and stability at launch\u003c\/li\u003e\n\u003cli\u003eEliminates IRS wheel hop for consistent performance\u003c\/li\u003e\n\u003cli\u003eExcellent street drivability with track-tested components\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications required\u003c\/li\u003e\n\u003cli\u003eBacked by Steeda’s limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhether you’re chasing a new personal best or simply want your Mustang to launch harder and straighter, the Steeda Stage 1 Drag Pack is the suspension upgrade that gets results—on and off the drag strip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The factory shock mount must be drilled out to 12mm, or use \u003ca href=\"https:\/\/store-boik6qqwac.mybigcommerce.com\/steeda-555-8152\/\"\u003eSteeda Billet Shock Mounts\u003c\/a\u003e for a direct fit.\u003c\/p\u003e\u003ch3\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/h3\u003e\u003cp\u003e- 2015 Ford Mustang\u003cbr\u003e- 2016 Ford Mustang\u003cbr\u003e- 2017 Ford Mustang\u003cbr\u003e- 2018 Ford Mustang\u003cbr\u003e- 2019 Ford Mustang\u003cbr\u003e- 2020 Ford Mustang\u003cbr\u003e- 2021 Ford Mustang\u003cbr\u003e- 2022 Ford Mustang\u003cbr\u003e- 2023 Ford Mustang\u003cbr\u003e- 2024 Ford Mustang\u003cbr\u003e- 2025 Ford Mustang\u003cbr\u003e- 2026 Ford Mustang\u003c\/p\u003e\u003cp class=\"pro_warng_msg\"\u003eCA Residents: WARNING: Cancer and Reproductive Harm \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ewww.P65Warnings.ca.gov\u003c\/a\u003e\u003c\/p\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":43875325116509,"sku":"555-4457","price":1949.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/files\/steeda-stage-1-drag-pack-15-18-mustang-gt-v6-eco-555-4457-3__54632.1755713443.gif?v=1765078762"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/4566\/0253\/collections\/steeda-pro-flow-cold-air-intake-tune-req-12-13-boss-302-555-3162-9__28421.1556108811.png?v=1765121704","url":"https:\/\/www.byepolr.com\/collections\/2024-2026-mustang-2.oembed?page=6","provider":"ByePolr Performance","version":"1.0","type":"link"}